Hawke Cable Gland（Hawke 123系列防爆格蘭）
Hawke Cable Gland（Hawke 123系列防爆格蘭）
Hawke Cable Gland（Hawke 123系列防爆格蘭）
上海頤品自動化，：
Hawke Cable Gland（Hawke 123系列防爆格蘭）
Hawke Cable Gland（Hawke 123系列防爆格蘭）
Hawke Cable Gland（Hawke 123系列防爆格蘭）
上海頤品自動化，：
Hawke123 Cable Gland-Industrial
Outdoor or indoor use.
For use with non-armoured elastomer and plastic insulated cables.
May be used on cables incorporating inner and outer cable sheath at two independent sealing points.
Ordering Format [ Gland Type / Size / Male Thread / Female Thread / Material / Options ]
Example without options: 123/ C / M32 / M32 / Brass
Example with alternative seal option: 123 / C / 1 1¼" NPT / M32 / Brass / S
Features
Provides a cable retention seal onto the cables outer sheath.
Materials & Finishes
The 123 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.
Technical Data
- Construction and Test Standards:
EN 62444. BS 6121 Part 1. Type A2. - Ingress Protection:
IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529. - Operating Temperature Range:
-60°C to +100°C - Deluge Protection to:
DTS01 - Assembly Instruction Sheet:
AI 398.
| CABLE GLAND SELECTION TABLE | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Entry Thread Size | ‘H’ Thread Length | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | ||||||
| ‘B’ Outer Sheath | |||||||||||
| Metric | NPT * | Standard Seal | Alternative (S) Seal | Across Flats | Across Corners | ||||||
| Standard | Option | Min. | Max. | Min. | Max. | ||||||
| Os | M20 ‡ | ½" | - | 15.0 | 3.0 | 8.0 | - | - | 40.0 | 24.0 | 26.5 |
| O | M20 ‡ | ½" | - | 15.0 | 7.5 | 11.9 | - | - | 40.0 | 24.0 | 26.5 |
| A | M20 | ¾" | ½" | 15.0 | 11.0 | 14.3 | 8.5 | 13.4 | 40.4 | 30.0 | 32.5 |
| B | M25 | 1" | ¾" | 15.0 | 13.0 | 20.2 | 9.5 | 15.4 | 44.3 | 36.0 | 39.5 |
| C | M32 | 1¼" | 1" | 15.0 | 19.0 | 26.5 | 15.5 | 21.2 | 47.2 | 46.0 | 50.5 |
| C2 | M40 | 1½" | 1¼" | 15.0 | 25.0 | 32.5 | 22.0 | 28.0 | 49.5 | 55.0 | 60.6 |
| D | M50 | 2" | 1½" | 15.0 | 31.5 | 44.4/42.3 † | 27.5 | 34.8 | 72.5 | 65.0 | 70.8 |
| E | M63 | 2½" | 2" | 15.0 | 42.5 | 56.3/54.3 † | 39.0 | 46.5 | 64.8 | 80.0 | 88.0 |
| F | M75 | 3" | 2½" | 15.0 | 54.5 | 68.2/65.3 † | 48.5 | 58.3 | 68.0 | 95.0 | 104.0 |
| G | M80 | 3½" | - | 20.0 | 67.0 | 73.0 | - | - | 68.0 | 106.4 | 115.0 |
| H | M90 | 3½" | - | 20.0 | 67.0 | 77.6 | - | - | 68.0 | 115.0 | 130.0 |
| J | M100 | 4" | - | 20.0 | 75.0 | 91.6 | - | - | 68.0 | 127.0 | 142.0 |
| All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. † Smaller value is applicable when selecting reduced NPT entry option. ‡ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9 mm. | |||||||||||
