Hawke防爆格蘭（Hawke 150/RAC Cable Gland）
Hawke防爆格蘭（Hawke 150/RAC Cable Gland）
Hawke防爆格蘭（Hawke 150/RAC Cable Gland）
上海頤品自動化，：
Hawke防爆格蘭（Hawke 150/RAC Cable Gland）
Hawke防爆格蘭（Hawke 150/RAC Cable Gland）
Hawke防爆格蘭（Hawke 150/RAC Cable Gland）
上海頤品自動化，：
Hawke150/Rac Cable Gland-Industrial
Application：Indoor use.
For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
Ordering Format [ Gland Type / Size / Male Thread / Female Thread / Material / Options ]
Example without options: 150/RAC / C / M32 / Brass
Example with alternative clamping ring option: 150/RAC / C / 1¼" NPT / Brass / AR
Features
Provides armour clamping using one clamping arrangement for all armour/braid types.
Materials & Finishes
The 150/RAC cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.
Technical Data
- Construction and Test Standards:
EN 62444, BS 6121 : Part 1 Type CW, CX, CY and CZ. - Ingress Protection:
IP66 to IEC/EN 60529. - Operating Temperature Range:
-60°C to +100°C - Deluge Protection to:
DTS01 (Deluge seal optional). - Assembly Instruction Sheet:
AI 393.
| CABLE GLAND SELECTION TABLE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Entry Thread Size | ‘H’ Thread Length | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | |||||||
| ‘A’ Inner Sheath | ‘B’ Outer Sheath | ‘C’ Armour/Braid | ||||||||||
| Metric | NPT * | Max. | Min. | Max. | Orientation 1 | Orientation 2 | Across Flats | Across Corners | ||||
| Standard | Option | |||||||||||
| Os | M20 ‡ | ½" | - | 15 | 8.0 | 5.5 | 12.0 | 0.8 / 1.25 | 0 / 0.8 | 52.0 | 24.0 | 26.5 |
| O | M20 ‡ | ½" | - | 15 | 11.9 | 9.5 | 16.0 | 0.8 / 1.25 | 0 / 0.8 | 52.0 | 24.0 | 26.5 |
| A | M20 | ¾" | ½" | 15 | 14.3 | 12.5 | 20.5 | 0.8 / 1.25 | 0 / 0.8 | 53.0 | 30.0 | 32.5 |
| B | M25 | 1" | ¾" | 15 | 20.2 | 16.9 | 26.0 | 1.25 / 1.6 | 0 / 0.7 | 69.5 | 36.0 | 39.5 |
| C | M32 | 1¼" | 1" | 15 | 26.5 | 22.0 | 33.0 | 1.6 / 2.0 | 0 / 0.7 | 64.0 | 46.0 | 50.5 |
| C2 | M40 | 1½" | 1¼" | 15 | 32.5 | 28.0 | 41.0 | 1.6 / 2.0 | 0 / 0.7 | 68.3 | 55.0 | 60.6 |
| D | M50 | 2" | 1½" | 15 | 44.4/42.3 † | 36.0 | 52.6 | 1.8 / 2.5 | 0 / 1.0 | 79.0 | 65.0 | 70.8 |
| E | M63 | 2½" | 2" | 15 | 56.3/54.3 † | 46.0 | 65.3 | 1.8 / 2.5 | 0 / 1.0 | 78.9 | 80.0 | 88.0 |
| F | M75 | 3" | 2½" | 15 | 68.2/65.3 † | 57.0 | 78.0 | 1.8 / 2.5 | 0 / 1.0 | 83.7 | 95.0 | 104.0 |
| G | M80 | 3½" | - | 20 | 72.0 | 75.0 | 89.5 | 2.0/3.5 | 0/1.0 | 95.6 | 106.4 | 115.0 |
| H | M90 | 3½" | - | 20 | 80.0 | 75.0 | 89.5 | 2.0/3.5 | 0/1.0 | 95.6 | 115.0 | 130.0 |
| J | M100 | 4" | - | 20 | 90.0 | 88.0 | 104.5 | 2.5/4.0 | 0/1.0 | 95.6 | 127.0 | 142.0 |
| All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard. For G size cable glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. † Smaller value is applicable when selecting reduced NPT entry option. ‡ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, maximum cable inner sheath diameter is 10.9mm. | ||||||||||||
| Alternative reversible armour clamping ring (RAC) Selection Table | ||
|---|---|---|
| Size Ref. | Steel Wire Armour/Braid/Tape | |
| Orientation 1 | Orientation 2 | |
| B | 0.9 / 1.25 | 0.5 / 0.9 |
| C | 1.2 / 1.6 | 0.6 / 1.2 |
| C2 | 1.2 / 1.6 | 0.6 / 1.2 |
| D | 1.45 / 1.8 | 1.0 / 1.45 |
| E | 1.45 / 1.8 | 1.0 / 1.45 |
| F | 1.45 / 1.8 | 1.0 / 1.45 |
