概述
對于采礦勘探地質學家而言，這些改進可轉化為在勘探目標和鉆探現場更快地捕獲數據。 ASD TerraSpec? 4 Hi-Res 礦物光譜儀提供的更高數據質量還有助于準確評估低濃度和低反射率礦物，比如蛇紋石和綠泥石等以前難以測量的含鐵礦物。 優點包括：
- 增強的光學配置可提供更精確的光譜結果，從而實現的光譜清晰度。
- 在 SWIR 1/SWIR 2 區域中擁有行業的性能，確保提供的蝕變礦物識別。
- 標準加固包鋼光纜可確保穩定的光譜質量。
- 無需樣品制備，這意味著可以在野外快速進行掃描。
將 ASD TerraSpec 4 Hi-Res 礦物分析儀與 Spectral Geoscience 提供的 The Spectral Geologist (TSG) 軟件搭配使用，可分析光譜并生成礦物學輸出結果。
關鍵應用
ASD TerraSpec 4 Hi-Res 礦物光譜儀適合在許多行業應用中使用，包括：
油砂和油頁巖分析
ASD 儀器用于現場監測油母巖和地瀝青的數量
石油勘探
石油地質學家利用 ASD 儀器能獲得更高的礦床礦物清晰度、進行實時地層對比、井眼穩定性監測和白云石孔隙度測定。
采礦生產和礦物加工
評估和監測礦物和礦石的特性，以大限度地改善各種采礦流程和作業。
礦物勘探
礦床繪制
礦物組合識別
鉆屑分析
巖心測井
確定地球化學梯度
粘土種類描繪
更快地找到礦體
技術指標
| 波長范圍 | 350-2500 nm |
| 分辨率 | 3 nm @ 700 nm 和 6 nm @ 1400/2100 nm |
| 掃描時間 | 100 毫秒 |
| 信噪比 | VNIR：9,000:1 @ 700 nm SWIR 1：9,000:1 @ 1400 nm SWIR 2：4,000:1 @ 2100 nm |
| 雜散光 | VNIR：5000:1 (0.02%) NIR：10,000:1 (0.01%) |
| 波長再現性 | 0.1 nm |
| 波長精度 | 0.5 nm |
| 通道 | 2151 |
| VNIR 檢測器 | (350-1000 nm) 512 元素硅陣列 |
| SWIR 1 和 2 檢測器 | (1001-1800 nm) 和 (1801-2500 nm) 漸變折射率 InGaAs 光電二極管，TE 冷卻 |
| 認證和審批 | CE 認證：EN61010-1:2001 第 2 版 歐盟指令：2006/95/EC、2004/108/EC NIST 可溯源校準 WEEE 合規性 |
| 通信 | 有線：10/100 Base T 以太網端口，帶以太網直連網線 無線：802.11g/n 無線網卡 |
| 尺寸 | （高 x 寬 x 深）12.7 x 36.8 x 29.2 cm (5 x 14.5 x 11.5 in) |
| 重量 | 5.44 kg (12 lbs) |
| 電池重量 | 1.2 kg (2.7 lbs) |
| 電池工作時間 | 大約 6 小時（不使用燈或附件） |
| 工作溫度 | 0 - 40° C (32 - 104° F) |
| 存放溫度 | -15 - 45° C (5 - 113° F) |
| 輸入功率 | 交流/直流開關電源和密封鉛酸凝膠電池 |
| 交流輸入 | 90-240 VAC，50/60 Hz |
| 直流輸入 | 12 VDC，60 W |
| 輔助端口電源 | 輸出，+12 VDC，27 瓦（大） |
| 軟件 | RS3? 光譜采集軟件，與 The Spectral Geologist 和 SpecMin 兼容，帶 ENVI?、ASD ViewSpec? Pro 的無縫界面支持進行后處理，可選配 Indico? Pro |
| 便攜性 | 堅固的儀器運輸箱；可選配帶軟面旅行袋的定制背包 |
| 保修 | 一年完整保修，包括專家級的客戶支持 |
| 計算機 | Windows? 7 64 位筆記本電腦（儀器控制器） |
附件
ASD TerraSpec® 4 Hi-Res 礦物光譜儀
探頭和照明
Contact Probe
The ASD Contact Probe is designed for contact measurements of solid raw materials such as minerals, grains, other granular materials. Its innovative optical design minimizes measurement errors associated with stray light and allows for measurement of samples through clear and transparent plastic bags.
In addition to the standard contact probe, ASD also offer the Hi-Brite contact probe and the Plant Probe.
All contact probes are available with a ruggedized cable feed and cable, designed for applications that involve extra cold or harsh temperatures. (see image below specifications)
Specifications:
| Length | 10" ( 25.4 cm) |
| Weight | 1.5 lbs (.7 kg) |
| Power requirements | 12-18 VDC, 6.5 W |
| Lightsource type/Life (approx.) | Halogen bulb/1500 hours |
| Halogen bulb color temperature | 2900 K |
| Spot size | 10 mm |
Fiber Optic Illuminator
The Fiber Optic Illuminator is a portable, external light source designed for use with ASD instruments and sampling accessories that do not have a built-in light source.
Technical Specifications
| Length | 11.43 cm (4.5 inches) |
| Width | 8.255 cm (3.25 inches) |
| Weight | 292 grams (10.3 ounces) |
Muglight
The ASD Muglight is designed for analysis of raw materials requiring reflectance and absorbance measurements. It can measure samples through glass vials, or using the ASD sampling tray adapter. It's unique and innovative design minimizes measurement errors associated with stray light and specular reflected components.
For users requiring higher intensity illumination, ASD also offers the Hi-Brite Muglight.
Muglight specifications:
| Size | 5.5” x 3.7” (14cm x 9.4cm) |
| Weight | 2.91 lbs (1.3 kg) |
| Power requirements | Input power 5.5 W, bulb 4 W |
| Light source (type/life) approx. | Tungsten Quartz Halogen b/1500rs |
| Bulb color temp | 2900 K |
| Spot size | 12 mm |
Rapid Analysis Probe
The Rapid Analysis Probe is specifically designed for speedy spectral collection of powders and other fine-grained materials such as small uniform seeds and grains. Its beveled tip and metal jacket greatly speed up the spectral collection process of fine grained materials to optimize workflow. Simply insert the Rapid Analysis Probe into your fine-grained media, collect the spectrum, use a chemical wipe to swipe the probe clean and move on to the next sample. It’s that easy! The Rapid Analysis Probe comes with a gimbaled white reference for high performance calibration. It can be used for quantitative predictive models.
If using this probe with a spectrometer such as a TerraSpec mineral analyzer or a LabSpec lab analyzer without an integrated light source, a Fiber Optic Illuminator is necessary. The Fiber Optic Illuminator provides the light source needed for sample collection.
Technical Specifications
Length: 21.6 cm (8.5 inches)
Spot size: 4 mm
Small Diameter Reflectance Probe
With an approximate spot size of only 2 mm, the Small Diameter Reflectance Probe was designed to collect spectra from individual small materials such as individual grains or vugs in a hand sample or rock core. It’s perfect for determining specific mineralogy of individual grains.
If using a spectrometer such as a TerraSpec mineral analyzer or a LabSpec lab analyzer without an integrated light source, a Fiber Optic Illuminator is required. The Fiber Optic Illuminator provides the necessary light source for sample collection.
Technical Specifications
Length: 10.2 cm (4 inches)
Field of View: 1 mm
Turntable
When your application requires analysis of irregularly shaped or non-homogeneous samples, the ASD Turntable is ideal for obtaining a highly accurate average. Especially useful for instrument owners in the grain, agriculture, pulp and paper, food, plastics and mining industries.
The Turntable offers:
- 53.2 mm sampling spot size
- Rotates at 22 RPM
- Fits up to a 150mm sample dish
- Compact (8"x11"x11" or 20.32 cm x 27.94 cm x 27.94 cm) footprint.
The Turntable comes standard with a 4000 hour halogen light source and one standard 150 mm x 15 mm Petri dish.
通用附件
Ergonomic Pro-Pack Backpack
The ASD Ergonomic Pro-Pack Backpack takes field portability to a higher level for FieldSpec?, LabSpec?, and TerraSpec? customers requiring the ultimate in portability.
Constructed of ultra-tough but lightweight material, the Ergonomic Pro-Pack Backpack weighs only 5.5 pounds (2.49 kg). The Pro-Pack Backpack positions the center of mass much closer to the body, and the easily adjustable ‘one size fits all' frame accommodates all body types for superior ergonomics.
Additionally, the Pro-Pack comes standard with:
- ‘Pull-out' waterproof rain hood built in
- Snap-on spool holder for protective storage of the fiber optic cable
- Larger storage pockets to hold the notebook controller and accessories
- Soft-sided travel case for backpack to aid in easy travel.
參考面板
Reference Panels
ASD carries a wide array of calibrated and non-calibrated diffuse white and gray reference panels in varying sizes (from 2 x 2 in. to 12 x 12 in. or 5.1 x 5.1 cm to 30.5 cm x 30.5 cm) and reflectance levels, including encapsulated gray scale (NIST/NRC traceable) wavelength and USP standards for USP 1119. Calibrated panels come with certificate and documentation showing standard deviation and reflectance factors.
All reference panels and standards may be purchased separately. To provide our customers with a more cost-effective approach, specific sizes or styles of reference panels are included in accessory bundles designed for maximum compatibility with a particular application.
Your ASD sales representative will be able to advise you on the best option(s) for your needs.
