FT-109A壓裂支撐劑體積密度測試儀
FT-109AFracturing proppant volume density tester
一.參照標準standard:
參照標準API RP60、Q/SY 124-2007和SY/T 5108-2006壓裂支撐劑性能指標及測試方法及QSY 125-2007壓裂支撐劑性能制表及評價測試方法制作
Meetthe standard: according to the latest domestic standard API RP60、Q/SY 124-2007 andSY/T 5108-2006 fracturing proppantperformance index and test method recommended and QSY 125-2007 fracturingproppant performance TAB and evaluationtest method
體積密度:?jiǎn)挝欢逊e體積的支撐劑質量稱為支撐劑體積密度;單位堆積體積的陶粒質量稱為陶粒的體積密度,是包含陶粒本身、開口氣孔和閉口氣孔三部分的平均密度。單位是g/mL
Volumedensity: The proppant mass of the unit's volume is called the proppant volumedensity;The mass of the ceramsite in the unit’s volume is called the volumedensity of the ceramsite, the average density of three parts of the ceramic grain itself, theopen pore and the closed stomata.Theunit is g/mL
二.參數要求:TechnicalParameters
漏斗上口到桶狀容器底板儀器臺面總高304.8mm;支撐劑下落點起到一儀器臺面的距離215.9mm;
Theheight from the upper opening of funnel to situla floor instrument table is304.8mm, the distance from the proppant drop point to the instrument table is215.9mm.
2.漏斗高76.2mm;漏斗口高12.7mm;桶狀容器高76.2mm;儀器臺面寬度=30.48mm。
膠皮堵球直徑=30.48mm;
Funnelheight 76.2mm, funnel opening height 12.7mm, situla height 76.2mm, instrumenttable width 30.48mm.
Rubberplugging ball diameter30.48mm.
不銹鋼支架架直徑=4.8mm;桶狀容積直徑38.1mm;
Stainlesssteel bracket diameter 4.8mm, situla diameter38.1mm.
漏斗頂部外徑=139.7mm;漏斗頂部?jī)?nèi)徑=114.3mm;
Funneltop outer diameter 139.7mm, funnel top inner diameter114.3mm.
漏斗和量杯為不銹鋼材質.
The funnel and the measuring cup are made ofstainless steel.
配置:毛刷;鋼尺;水準儀;說明書;合格證;保修卡;
Equipment:brush, steel, level, manual, certificate, warranty card.
FT-109A壓裂支撐劑體積密度測試儀 視頻文件鏈接:
/v_show/id_XMTMyMjgzODc0OA==.html?spm=a2hzp.8253869.0.0