一，全自動凍融試驗箱概述：
全自動凍融試驗箱是專業混凝土檢測儀器，適用于混凝土、建筑磚塊、陶瓷磚、外墻砂漿及其它建材的凍融試驗，制冷壓縮機采用法國泰康節能、環保型渦旋式低溫壓縮機組，風機為無極調速，可根據環度可根據環境溫度從而改變風機的轉速。 整體性能穩定，全自動凍融試驗箱采用好的不銹鋼板，一體式結構，操作簡單方便。
First, the automatic freeze-thaw test box overview:
The automatic freeze-thaw test box is a professional concrete testing instrument, which is suitable for the freeze-thaw test of concrete, building bricks, ceramic tiles, exterior wall mortar and other building materials. The refrigeration compressor adopts France Taikang imported energy-saving and environment-friendly scroll-type low temperature. In the compressor unit, the fan is steplessly regulated, and the fan speed can be changed according to the ambient temperature. The overall performance is stable, and the automatic freeze-thaw test chamber is made of high-quality stainless steel plate with integrated structure, which is easy and convenient to operate. It has the characteristics of small footprint and convenient movement. It is the preferred model for building materials enterprises, colleges and universities and testing centers.
二，全自動凍融試驗箱符合標準：
GB/T3810-2006陶瓷磚抗凍性試驗方法
GB/T2542-2003砌墻磚試驗方法
GB/T4111-1997混凝土小型空心砌塊試驗方法
GB/T11973-1997加氣混凝土抗凍性試驗方法
JGJ/T70-2009砂漿抗凍性能試驗方法
GB/T11973-2006蒸汽加氣混凝土砌塊試驗方法
GB/T11968-2006混凝土小型空心砌塊試驗方法
GB/T241-1994巖石抗凍性試驗方法
Second, the automatic freeze-thaw test chamber meets the standards:
GB/T3810-2006 ceramic brick frost resistance test method
GB/T2542-2003 brick wall test method
GB/T4111-1997 concrete small hollow block test method
GB/T11973-1997 Aerated concrete frost resistance test method
JGJ/T70-2009 mortar anti-freezing performance test method
GB/T11973-2006 steam aerated concrete block test method
GB/T11968-2006 concrete small hollow block test method
GB/T241-1994 rock frost resistance test method
三，全自動陶瓷磚凍融試驗箱產品特點：
壓縮機、加熱部分、電源控制部分均采用進口件，高質量、高性能
滿載運轉時凍融箱內各點溫度極差不超過2℃
儀表自動控制，數據曲線實時動態顯示、試驗數據自動存儲，具有試驗意外終斷自動恢復功能
安裝方便，占地小，低噪音
Third, automatic ceramic tile freeze-thaw test chamber Features:
The compressor, heating part and power control part are all imported parts, high quality and high performance.
The temperature difference between the various points in the freeze-thaw box does not exceed 2 °C when fully loaded
Automatic meter control, real-time dynamic display of data curve, automatic storage of test data, automatic recovery of test accidental termination
Easy installation, small footprint and low noise
四，全自動凍融試驗箱技術參數：
冷凝器冷卻方式 | 風冷 | 風冷 |
試件數量 | 16件 | 28件 |
試件尺寸 | 100×100×400，測溫件尺寸相同，中間留有測溫孔 | |
凍融循環周期 | 2.5～4小時，融化時間不小于1∕4凍融周期 | |
傳感器1：中溫度控制 | 5～-18±2℃ | |
傳感器2：液體溫度控制 | 液體溫度控制高溫控制：18～23℃ 低溫控制：-23～-18℃ | |
傳感器3：對角線溫度控制 | 對角線溫度監測箱體內溫度極差不超過2℃ | |
傳感器4：二次保護溫度控制 | 50℃～-30℃ | |
溫度記錄儀 | 數字顯示無紙記錄儀 | |
試件桶尺寸 | 120×120×500 | |
凍融循環介質 | －45℃防凍液 | |
凍融循環介質充注量 | 液面高于試塊10－15毫米 | |
制冷機壓縮機 | 全封閉 4HP | 全封閉5HP |
加熱功率 | 5kW | 6kW |
zui大運行功率 | 6kW | 7kW |
供電 | 3N380V 50Hz | 3N380V 50Hz |
外形尺寸 | 1900×800×1100 | 1900×1300×1100 |
重量 | 約400kg | 約500kg |
五，全自動凍融試驗箱使用方法：
試驗采用水凍水融法,把符合外觀要求的100×100×400的混凝土試件和測溫試件放進試件桶中,用17~23℃的水浸泡4天，然后把試件桶放入凍融試驗槽中，用循環的冷凍液對試件反復進行降溫和升溫，周期性地把試件內放的水進行凍結和融化?；炷猎嚰孔?5次凍融循環試驗，都要測量1次重量和相對動彈性模量。當相對動彈性模量下降至初始值的60％或質量損失率達5％時，即認為試件已達破壞，并以相應的凍融循環次數作為該混凝土的抗凍等級。如果試件凍融至預定的循環次數，而相對動彈性模量或質量損失率均未達到上述指標，可認為試驗的混凝土抗凍性已滿足設計要求。根據凍融循環次數及相應的相對動彈性模量可計算出混凝土耐久性系數，供設計選材時參考。因此，在動彈性模量，質量損失率和耐久性系數為評定指標的混凝土抗凍試驗中。
Fifth, the use of automatic freeze-thaw test chamber:
The test uses the water-frozen water-melting method, put 100×100×400 concrete specimens and temperature-measuring specimens that meet the appearance requirements into the specimen bucket, soak them in water at 17~23°C for 4 days, then put the specimen bucket The sample is placed in a freeze-thaw test tank, and the test piece is repeatedly cooled and warmed by the circulating freezing liquid, and the water placed in the test piece is periodically frozen and melted. For every 25 freeze-thaw cycles of concrete specimens, the weight and relative dynamic modulus are measured once. When the relative dynamic elastic modulus drops to 60% of the initial value or the mass loss rate reaches 5%, it is considered that the test piece has reached the damage, and the corresponding freeze-thaw cycle number is used as the anti-freeze level of the concrete. If the test piece freezes and freezes to the predetermined number of cycles, and the relative dynamic elastic modulus or mass loss rate does not reach the above index, it can be considered that the tested concrete frost resistance has met the design requirements. According to the number of freeze-thaw cycles and the corresponding relative dynamic elastic modulus, the concrete durability coefficient can be calculated for reference when designing materials. Therefore, in the concrete antifreeze test in which the dynamic elastic modulus, the mass loss rate and the durability coefficient are the evaluation indexes, the device is an essential test device. It can meet the needs of design, research and construction of various related industries at home and abroad.
