混凝土含氣量測定儀符合GB/T5008-2002《普通混凝土拌合物性能試驗方法》關于混凝土拌合物含氣量試驗的有關規定?；炷梁瑲饬繙y(cè)定儀廣泛適用于建工，公路，鐵路，水利水電，港口，機場建設等各種施工現場混凝土含氣量的測定，工程質量的監督管理，混凝土材料的科研教學實驗。穩定 的測定結果給科研檢測提供了可靠的數據依據，機身采用全鋁鑄造，防震、防水壓力表，特別適合現場操作試驗。用于測定混凝土拌合物中的含氣量，適用于集料粒徑大于40mm，含氣量不大于10％，有坍落度的混凝土。在混凝土的含氣量控制中發揮了重要作用。本測定儀具有操作簡便、測量準確、讀數直觀等優點，是一種混凝土拌合物含氣量測定儀。
The concrete gas content tester complies with the relevant provisions of the GB / T5008-2002 "Common Concrete Mixture Performance Test Method" on the concrete mix gas content test. Concrete gas content measuring instrument is widely used in construction, highway, railway, water conservancy and hydropower, port, airport construction and other construction sites to determine the concrete gas content measurement, engineering quality supervision and management, concrete materials research and teaching experiments. The stable measurement results provide a reliable data basis for scientific research testing. The body is made of all-aluminum casting, shockproof and waterproof pressure gauges, which are especially suitable for field operation tests. It is used to determine the air content in concrete mixtures. It is suitable for concrete with aggregate particle size greater than 40mm, air content not more than 10%, and slump. It plays an important role in controlling the air content of concrete. The analyzer has the advantages of simple operation, accurate measurement, and intuitive reading, etc and is a kind of concrete gas content measuring instrument.
混凝土含氣量測定儀是 混凝土檢測儀器，使用前務必仔細閱讀說明書。并由 實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請于我公司客服人員聯系。由上海榮計達儀器科技有限公司提供，設備質保期一年，一年內產品如有質量問題，供方負責免費維修。如果因操作不當或者人為損壞，我公司亦應提供維修、更換服務，由此產生的費用我公司會酌情收取。
The concrete gas content measuring instrument is a concrete testing instrument. Please read the instructions carefully before use. It is operated by experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff. Provided by Shanghai Rongjida Instrument Technology Co Ltd the equipment warranty period is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged at our discretion.
混凝土含氣量測定儀適用標準：
產品引用下列標準：
《普通混凝土拌合物性能試驗方法》GB/T5008-2002；
《普通混凝土外加劑應用技術規范》GB50119-2002；
《普通混凝土外加劑》 GB8076-1997；
《水工混凝土試驗規程》DL5150-2001；
《公路工程水泥混凝土試驗規程》JTJ053-94。
Applicable standards for concrete air content tester:
The product references the following standards:
"Test method for performance of ordinary concrete mixture" GB / T5008-2002;
"Technical specifications for the application of ordinary concrete admixtures" GB50119-2002;
"Ordinary concrete admixture" GB8076-1997;
"Hydraulic concrete test code" DL5150-2001;
"Highway Engineering Cement Concrete Test Regulations" JTJ053-94.
技術參數：
★量缽容積：7升
★含氣量量程：≤10%
★粗骨料的A大粒徑：≤40mm
★A小讀數：0.1%
★設計A高壓力：4MPa
★A高工作壓力：0.4MPa
★氣密性試驗壓力：0.4MPa
★重量：11Kg
Technical parameters of concrete gas content measuring instrument:
★ Measuring bowl volume: 7 liters
★ Gas content range: ≤10%
★ A large particle size of coarse aggregate: ≤40mm
★ A small reading: 0.1%
★ Design A high pressure: 4MPa
★ A high working pressure: 0.4MPa
★ Airtightness test pressure: 0.4MPa
★ Weight: 11Kg
操作規程：
★用濕布擦凈量缽與缽蓋內表面，并使量缽呈水平放置。
★將新拌混凝土拌合物均勻地裝入量缽內，使混凝土拌合物調出量缽少許。裝料時可用搗棒稍加插搗，裝好后，當用振實臺（振動參頻率50Hz，空載時振幅0.5±0.1mm）振實時，在振動過程中如混凝土拌合物沉落到低于內口，則應隨時添加混凝土拌合物，振動至混凝土表面平整，呈現釉光時即停止振動。
不用振動臺而換用搗棒搗實時，將混凝土拌合物分三層裝入，每層搗時后約為量缽高度的三分之一，插搗底層時搗棒應貫穿整個深度。插搗上層時搗棒應插入下層10～20 mm。每層搗實后，可把搗棒墊在量缽底部，將量缽左右交替地顛擊地面15次。
★ 搗實完畢后，應立即用刮尺刮去表面多余的混凝土拌合物，表面如有凹陷應予*，然后用鏝刀抹平，并使其表面光滑無氣泡。
★ 擦凈量缽和缽蓋邊緣，將“O”形橡膠密封圈（238×8.6）放于缽蓋邊緣的凹槽內，蓋上缽蓋，用夾子夾緊，使之氣密良好，并用水平儀檢查水平。
★ 打開小龍頭和出氣閥，用注水器從小龍頭處往量缽中注水直至水從氣閥出口流出，再關緊小龍頭和出氣閥。
★關閉好所有的閥門后，用打氣筒打氣加壓，使表壓稍大于0.1MPa。
注：⑴每當讀取壓力時，用指尖輕彈表盤并待指針停止擺動后再讀數。
⑵ 0.1MPa壓力線為儀器的初始?jí)毫€，0.1MPa為儀器的初始?jí)毫Α?/p>
★按下閥門2～3次，用木錘輕敲量缽的四周，使壓力均勻分布于試樣各處，再次按下閥門桿，待壓力表指針穩定后，測得壓力表讀數，并根據儀器標定的含氣量與壓力讀數關系曲線，得到所測混凝土拌合物樣品的儀器測定的表觀含氣量值A(chǔ)1
Operation rules of concrete gas content measuring instrument:
★ Wipe the inner surface of the measuring bowl and the lid with a damp cloth, and place the measuring bowl horizontally.
★ Fill the fresh concrete mixture evenly into the measuring bowl and make the concrete mixture out of the measuring bowl a little. When loading, you can use a tamper to insert and tamp slightly. After installation, when using a vibrating table (vibration parameter frequency 50Hz, no-load amplitude 0.5 ± 0.1mm) to vibrate in real time, during the vibration process, the concrete mixture sinks to Below the inner mouth, concrete mixture should be added at any time, and vibration should be leveled on the concrete surface, and stop vibrating when glaze appears.
Instead of shaking the table with a tamping rod, load the concrete mixture in three layers. After each layer is punched, it is about one-third of the height of the measuring bowl. When the bottom layer is inserted, the tamping rod should penetrate the entire depth. When inserting the upper layer, the plunger should be inserted into the lower layer 10 to 20 mm. After each layer is tamped, you can pad the tampon at the bottom of the measuring bowl and hit the ground alternately from left to right 15 times.
★ After tamping is completed, the excess concrete mixture on the surface should be scraped off with a scraper. The surface should be filled with any dents, and then smoothed with a trowel to make the surface smooth and free of air bubbles.
★ Wipe the edges of the measuring bowl and bowl cover, place the "O" shaped rubber seal ring (238 x 8.6) in the groove on the edge of the bowl cover, cover the bowl cover, clamp with a clip to make it airtight, and use The spirit level checks the level.
★ Open the small faucet and the air outlet valve, use a water injector to inject water from the small faucet into the measuring bowl until the water flows out of the air valve outlet, and then close the small faucet and the air outlet valve.
★ After closing all the valves, pressurize with a pump to make the gauge pressure slightly higher than 0.1MPa.
Note: ⑴Every time you read the pressure, flick the dial with your fingertips and wait for the hands to stop swinging before reading.
⑵ 0.1MPa pressure line is the initial pressure line of the instrument, and 0.1MPa is the initial pressure of the instrument.
★ Press the valve 2 or 3 times, and tap the circumference of the measuring bowl with a wooden hammer to distribute the pressure evenly throughout the sample. Press the valve rod again. After the pointer of the pressure gauge stabilizes, measure the pressure gauge reading and follow The relationship curve between the gas content and pressure readings calibrated by the instrument to obtain the apparent gas content value A1 determined by the instrument of the concrete mixture sample measured
測試完畢后：
★打開出氣閥，從量缽中放氣。如需對同一試樣重量測定含氣量時，則重復上述5-7步驟。
★打開小龍頭，松開夾子，取下缽蓋。
★ 倒掉量缽中的混凝土拌合物試樣，清洗缽蓋和量缽的內表面。
★含氣量測定儀如不連續使用，需打開微調閥放氣，使氣室壓力與大氣壓一致。
注：在操作過程中，如氣室氣壓通過微調閥放盡，而量缽內還有壓力時，不能按下閥門桿，否則會把水吸入氣室，使以后的測試產生誤差。
After testing the concrete gas content tester:
★ Open the air outlet valve and deflate from the measuring bowl. If you need to determine the gas content of the same sample weight, repeat the above steps 5-7.
★ Open the small faucet, loosen the clip, and remove the lid.
★ Discard the concrete mixture sample in the measuring bowl, and clean the lid and the inner surface of the measuring bowl.
★ If the gas content measuring instrument is not used continuously, open the fine adjustment valve to deflate, so that the pressure of the air chamber is consistent with the atmospheric pressure.
Note: During the operation, if the air chamber pressure is exhausted through the fine adjustment valve, and the pressure is still in the measuring bowl, the valve rod cannot be pressed, otherwise water will be sucked into the air chamber, which will cause errors in subsequent tests.
混凝土含氣量測定儀裝箱單：
★主機 1臺
★合格證 1份
★使用說明書 1份
附件：1）搗棒 1根
2）300mm鋼尺 1把
3）吸水球 1只
4）校正管 1套（裝于主機上）
Packing list of concrete gas content measuring instrument:
★ 1 host
★ 1 certificate
★ Instruction manual
Accessories: 1) 1 tamper
2) 300mm steel ruler
3) One water polo ball
4) 1 set of calibration tube (installed on the host)
