角接取壓標準噴嘴選型
1-1-2節流件為ISA1932噴嘴
型號：Model:HLGPH
適用范圍：Scope of application:BN50~630mm
適用壓力：Applicable presures:PN0.01~2.5Mpa
適用溫度：Applicable temperatures:T≤400℃
直徑比：Diameter ratio：β=0.3~0.8
雷諾數：Reynolds number:Red=5×10°~10°可提供前后各2D或特殊要求長度的測量管段，D為管道內徑。
We can provide 2D measurement pipe sections or those of lengths of special requirements for the front and back respectively.D refers to the pipe inside diameter.
用途及特點：適用于氣體、液體和蒸氣等流量測量、控制和調節。它具有測量精度高、壓力損失小，使用壽命長等特點。
Uses and features:It is Tit for the measurement，control and adjustment of the flow of gas，liquid or steam，featuring a high measurement precision，a light pressure loss，a long service life，ete.
1-2-2節流件為ISA1932噴嘴
型號：Model:HLGPZ
適用范圍：Scope of application:DN400~630mm
適用壓力：Applicable pressures:PN0.01~2.5Mpa
適用溫度：Applicable temperatures;T≤350℃
直徑比：Diameter ratio：β=0.32~0.8
雷諾數:Reynolds numbers:Red=5×10'~10°
可提供前后各2D或特殊要求長度的測量管段，D為管道內徑。
We can provide 2D measurement pipe sections or those of lengths of special requirements for the front and back respectively.D refers to the pipe inside diameter.
用途及特點：適用于氣體、液體等介質的流量測量控制和調節。它具有測量精度高、安裝使用方便，造價低等特點。
Uses and features:It is fit for the measurement，control and adjustment of the flow of media such as gas and liquid，featuring a high measurement precision，easy mounting and use，a low construction cost，ete.
1-1-3焊接噴嘴
型號:Model：HLGBH HLGPH
適用范圍：Scope of application:DN50~400mm
適用壓力：Applicable pressures:PN2.5~37Mpa
適用溫度：Applicable temperatures:T≤555℃
直徑比：Diameter ratio：β=0.3~0.8
雷諾數：Reynolds number:Red=5×10'~10'
可提供前后各2D測量管段，D為管道內徑。
We can provide 2D measurement pipe sections for the front and back respectively.D refers to the pipe inside diameter.
用途及特點：適用于電廠高溫高壓下的液體，蒸氣及熱網管道的流量測量、控制和調節。它具有耐沖擊，孔板或噴嘴不易變形，壓力損失小，使用壽命長等特點。
Uses and features:It is fit for the measurement，control and adjustment of the flow of liquid，steam and heat network piping under a high temperature and pressure featuring impact resistance，orifice or nozzle being unlikely to suffer deformation，a light pressure loss，a long service life，ete.
