電磁流量計工作原理:
基于法拉第電磁感應定律即當導電液體流過電繳流量計時,導體液體中回產生與平均流速V(體積流量)成正比的電壓,其感應電壓信號通過兩個與液體接觸的電極檢測,通過電纜傳至放大器,然后轉換成統一的輸出信號,基于電磁流量計的測量原理,要求流動的液體具有限度的導電率。
It is based on the Faraday's electromagnetic induction law,that is,when a conductive liquid pases the electromagnetic flowmeter,it will produce a voltage directly proportional to the average velocity V(volume flow).
The induced voltage signal is detected via the two electrodes in contact with the liquid and is sent to the amplifier via the cable to be converted into a total output signal.According to the measurement principle of the electromagnetic flowmeter,the flowing liquid is required to have a minimum conductivity.