EC 28基本單元;
EC 28D帶顯示的氣體探測器;
EC 28DA帶顯示和報(bào)警功能的氣體探測器;
EC 28DAR帶顯示和報(bào)警功能以及繼電器的氣體探測器;
EC 28B帶總線連接的氣體探測器;
.....
EC28 Transmitter
For toxic gases, oxygen and hydrogen
Superior technology
Wherever gas hazards are to be found, the EC28 provides the best solution for safe monitoring. ATEX-certified design, built-in EX-certified horn and bright LED lights allow safe operation. The gas alarm is transmitted to the central control panel, simultaneously warning the control room and the worker in the danger area.
Smart sensor technology
Installation and sensor exchange are quick and easy using pre-calibrated smart, plug-in sensors. One-man calibration/ adjustment is possible directly at the transmitter, without opening the housing.
Versions for each application
EC28 basic unit
EC28 D with additional display of gas concentration
EC28 DA with additional bright LED lights and loud horn. The extra costs for installing an EX-certified horn and audible alarm are omitted
EC28 DAR with additional external alarm relay
EC28 B with additional bus connection
EC28 DB with additional display of gas concentration
EC28 DAB with additional bright LED lights and loud horn. The extra costs for installing an EX-certified horn and audible alarm are omitted
EC28 i intrinsically safe version
EC28 Di instrinsically safe, with additional display of gas concentration
The advantages at a glance
- Three choices – no display with display or with display and built-in audible and visual alarms
- ATEX-Certification II 1G EEx ia IIC T4/ II 2G EEx em [ib] IIC T4
- BVS 04 ATEX E 132 X / BVS 04 ATEX E 132 X 0158
- Ex-certified visual and loud acoustic alarm
- Less wiring required
- Simple sensor exchange using smart, plug-in sensors
- Long sensor lifetime
- Low maintenance costs
- Status and function display directly on the transmitter
- One-man calibration/ adjustment without opening casing
- Operation possible in inaccessible places via remote control (option)
Remote control (option)
Some flammable gases are lighter than air (e.g. methane). If a transmitter is installed close to the ceiling, it can be connected by a fixed installed cable with a plug connection to the remote control. Thus, all adjustments can be made comfortably from floor level. With one remote control device, an unlimited number of transmitters can be controlled in this way.
Using transmitters without display, the remote control shows the current values on its’ own display. The display of the remote control mimics the transmitter display exactly. Inspection, maintenance and adjustment are therefore greatly simplified. Using the remote control inspection, service and calibration can be performed easily by one person.