Bh-148車跌落疲勞試驗機
一；測試試驗標準： ISO 7176-8及gbT18029.8 2008
二、試驗要求：
1．能使車從50mm±5mm高處落到一剛性的水平測試平板上；
2．能轉動車的輪子，以避免每一次跌落輪子的沖擊均作用在同一部位；
3．確保車每一次跌落前保持靜止?fàn)顟B(tài)；
4．有跌落計數器。跌落次數可設置，
5．要確保車每次跌落時所有輪子同時著地。
6．車要自動完成車的托起和跌落。1、 Test standard: ISO 7176-8 and gbt18029.8 2008
2、 Test requirements:
1. The wheelchair can fall on a rigid horizontal test plate from a height of 50 mm ± 5 mm;
2. The wheel of wheelchair can be rotated to avoid the impact of wheel falling on the same part every time;
3. Ensure that the wheelchair remains stationary before each fall;
4. Drop counter. Drop times can be set,
5. Make sure that all wheels touch the ground at the same time every time the wheelchair falls.
6. The wheelchair shall automatically lift and drop the wheelchair.
