TCPA300 和 TCPA400 系列 AC/DC 電流測量系列是滿足當今電流測量需要的非常*的電流測量系統。當通過 TEKPROBE Level II、TekConnect（使用 TCA-BNC）或 TekVPI（使用 TPA-BNC）接口連接泰克示波器時，電流測量和計算變得輕松簡單。
主要性能指標
AC/DC 測量功能
DC - 100 MHz，電流探頭放大器 (TCPA300) 使用：
DC - 100 MHz，30 A DC (TCP312A)
DC - 50 MHz，50 A DC (TCP305A)
DC - 15 MHz，150 A DC (TCP303)
DC - 50 MHz，電流探頭放大器 (TCPA400) 使用：
DC - 2 MHz，750 A DC 1 (TCP404XL)（500 A DC 連續電流）
1 降額與占空比有關
主要特點
自動定標和確定單位1 - 示波器屏幕的幅度和電流讀數通過消除手動計算，減少了測量誤差
AC/DC 輸入耦合
插入阻抗低，降低了被測器件的負荷
分裂鐵心結構，電路連接簡便
狀態指示器提供虛擬工作狀態和潛在錯誤條件通知 — 消磁、探頭張度、超載、不端接 50 ??6??8、不兼容的探頭類型
降低了直流漂移和噪聲，從而改進低電平電流測量
2.需要 TDS TEKSCOPE 示波器或帶有 TCA-BNC 適配器的 TekConnect 示波器
應用
電信、數據通信、計算機和半導體電力電子環保行業設計師、安裝人員和維修人員的發展和分析解決方案：
電源（開關和線性）
半導體設備（SCR、IGBT、MOSFET、CMOS、BJT）
功率逆變器/轉換器
電子鎮流器
工業/消費電子產品
移動通信（電話、衛星、中繼站）
馬達驅動器
運輸系統（電動車輛、電動火車、機車、航空電子設備）
滿足當今的 AC/DC 電流測量應用
TCPA300 放大器在與 TCP312A、TCP305A 或 TCP303 探頭一起使用時，提供了一系列電流測量功能，彌補了小電流測量產品與超高電流測量產品之間的空白。這三個探頭提供了 30 A、50 A 和 150 A 連續直流電流的電流測量功能。對更高的電流電平，帶有 TCP404XL 電流探頭的 TCPA400 放大器可以測量 500A 和 750A 的連續直流電流，降額與占空比有關。
帶 TCPA300 的 TCP312A 實現了更高頻率的性能，提供了 ≥100 MHz 的帶寬及 30A 的直流電流。
TCPA300,電流放大器,TCPA400,TCP404XL,探頭,TCP303A,TCP305A,TCP312A
TCPA300 and TCPA400 series AC/DC current measurement system is a very advanced current measurement system to meet the needs of current measurement. When connecting to a Teke oscilloscope via the TEKPROBE Level IIP TekConnect (using TCA-BNC) or TekVPI (using the TPA-BNCC) interface, current measurement and calculation become easier and easier
Main Performance Indicators
AC / DC Measurement Function
DC - 100 MHz , Current Probe Amplifier ( TCP A300 )
DC - 100 MHz , 30 A DC ( TCP 312A )
DC - 50 MHz , 50 A DC ( TCP 305A )
DC - 15 MHz , 150 A DC ( TCP 303 )
DC - 50 MHz , Current Probe Amplifier ( TCP A400 )
DC - 2 MHz , 750 A DC 1 ( TCP 404XL ) ( 500 A DC Continuous Current )
1. decrease related to duty cycle
Main characteristics
Automatic calibration and determination unit 1-oscilloscope screen reading of amplitude and current reduces measurement error by eliminating manual calculation.
Main Performance Indicators
2. TDS TEKSCOPE oscilloscope or TekConnect oscilloscope with TCA-BNC adapte
3. Power supply (switch and linearity)
Satisfy the current Application of AC/DC current Measurement
Power supply (switch and linearity)
Semiconductor equipment SCR IGBT MOSFETT CMOS BJT Power inverter
converter Electronic ballast Industrial
consumer electronics communications (telephone, satellite, repeater)
Motor driver Transport systems (electric vehicles, electric trains, locomotives, avionics)
Satisfy the current Application of AC/DC current Measurement
When the TCPA300 amplifier is used with the TCP312A TCP305A or TCP303 probe, it provides a series of current measurement functions, which make up the gap between the low-current measurement product and the ultra-high current measurement product. The three probes provide current measurement functions for 30 A 50 A and 150 A continuous DC currents. For higher current levels, TCPA400 amplifiers with TCP404XL current probes can measure the continuous DC currents of 500A and 750A, and the reduction depends on the duty cycle. The TCP312A with TCPA300 achieves higher frequency performance, providing bandwidth of ≥ 100 MHz and DC current of up to 30A.
