重慶汗丁直銷olympus奧林巴斯45MG超聲波測厚儀
重慶汗丁直銷olympus奧林巴斯45MG超聲波測厚儀產品概述：
在其基本配置中，45MG是一種簡單直接的量具，需要*少的操作員培訓來處理*常見的厚度測量應用。然而，通過附加的可選軟件選件和傳感器，45MG可以變得更加*，并且可以使應用遠遠超過典型的入門級應變計。此外，大多數選項在購買時單獨提供，或者可以在將來根據您的需求變化添加。
- 兼容全系列奧林巴斯雙元件傳感器，用于內部腐蝕金屬的厚度測量
- Min./Max。模式
- 兩種報警模式
- 差分模式
- 基于時間的B掃描
- 減少率
- 增益調整（標準，高和低）
- 密碼儀器鎖
重慶汗丁直銷olympus奧林巴斯45MG超聲波測厚儀產品可選功能：
從簡單的腐蝕計到多功能精密厚度計，只需幾個關鍵行程。45MG提供五種代碼激活軟件選項，使其成為業界*通用的厚度計之一。
重慶汗丁直銷olympus奧林巴斯45MG超聲波測厚儀產品設計：
專為惡劣環境而設計
- 堅固耐用，專為IP67設計
- 爆炸性氣氛：根據國家消防協會規則（NFPA 70）第500條中的第I類第2分部D類定義的安全操作，并使用MIL-STD-810G，方法511.4，程序I進行測試。
- 使用MIL-STD-810G，方法516.5，程序I，每個軸6個循環，15g，11毫秒半正弦測試沖擊。
- 使用MIL-STD-810G，方法514.5，程序I，附錄C，圖6進行振動測試，一般曝光：每個軸1小時。
- 工作溫度范圍寬
- 可選的保護橡膠套，帶有量具支架
專為輕松操作而設計
- 用于右手/左手操作的簡單鍵盤
- 易于操作員界面，可直接訪問大多數功能
- 內置和可移動microSD存儲卡存儲
- USB通訊端口
- 可選的字母數字?jǐn)?shù)據記錄器，具有475,000個厚度讀數或20,000個波形
- 默認/自定義單元件傳感器設置（可選）
- 密碼保護儀器鎖
- 彩色透反式QVGA顯示屏，具有室內和室外顏色設置，具有出色的清晰度
重慶汗丁直銷olympus奧林巴斯45MG超聲波測厚儀產品技術規格：
Measurements Dual element transducer measurement mode Time interval from a precision delay after the excitation pulse to the first echo Echo-to-Echo (optional) Time interval between two successive back-wall echoes to eliminate paint or coating thickness THRU-COAT® measurement (optional) Measurement of true metal and coating thicknesses with a single back-wall echo (with D7906-SM, D7906-RM, and D7908 transducers) Single element transducer measurement modes (optional) Mode 1: Time interval between the excitation pulse and the first back-wall echo
Mode 2: Time interval between the delay line echo and the first back-wall echo (with delay or immersion transducers)
Mode 3: Time interval between successive back-wall echoes following the first interface echo after the excitation pulse (with delay line or immersion transducers) Thickness range 0.080 mm to 635 mm (0.003 in. to 25.0 in.) depending on material, transducer, surface conditions temperature, and selected configuration (Full range requires single element option) Material velocity range 0.508 mm/μs to18.699 mm/μs (0.020 in./μs to 0.7362 in./μs) Resolution (selectable) Low: 0.1 mm (0.01 in.)
Standard: 0.01 mm (0.001 in.)
Single Element option: 0.001 mm (0.0001 in.) Transducer frequency range Standard: 2.25 MHz to 30 MHz (-3 dB) High Penetration (Single Element option): 0.50 MHz to 30 MHz (-3 dB) General Operating temperature range -10 °C to 50 °C (14 °F to 122 °F) Keypad Sealed, color-coded keypad with tactile and audible feedback Case Impact-resistant and water-resistant, gasketed case with sealed connectors. Designed for IP67. Dimensions (W x H x D) Overall: 91.1 mm x 162 mm x 41.1 mm (3.59 in. x 6.38 in. x 1.62 in) Weight 430.9 g (0.95 lb) Power Supply 3 AA batteries/USB power supply Battery life operating time 3 AA alkaline: 20 to 21 hours
3 AA NiMH: 22 to 23 hours
AA Lithium: 35 to 36 hours Standards Designed for EN15317 Display Color transflective QVGA display Liquid crystal display, display area 54.61 mm x 41.15 mm (2.15 in. x 1.62 in.) Rectification Full wave, RF, half-wave positive, or half-wave negative (Waveform option) Inputs/Outputs USB 2.0 client Memory card Maximum capacity: 2 GB removable microSD memory card Internal Data Logger (Optional) Data logger The 45MG identifies, stores, recalls, clears, and transmits thickness readings, waveform images, and gage configuration information through USB or microSD. Capacity 475,000 thickness measurements or 20,000 waveforms with thickness measurements File names, IDs, and comments 32-character file names and 20-character alphanumeric location codes with four comments per location File structure Six standard or custom application-specific file structures Reports On-gage reporting of summary with statistics, Min./Max.
