ÄKTA avant 25
| 參數(shù) | ÄKTA avant 25 |
|---|---|
| Application | Fast and secure process development and method optimization |
| Application supported | Affinity chromatography, gel filtration/size exclusion chromatography, ion exchange chromatography, and hydrophobic interaction chromatography |
| Automatic buffer preparation | BufferPro |
| Autosampler injection | No |
| Buffer selection | 18 buffer inlets, option of up to 46 |
| Compliance | The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from Cytiva and connected only to other CE labeled Cytiva modules or other products as recommended. For regulatory details please see declaration of conformity. |
| Depth | 710 mm |
| Flow cell path length | 2 mm (optional 10 mm) |
| Flow rate | 0.001 mL/min-25 mL/min |
| Height | 660 mm |
| Includes | Accessory box, 3 mixer chambers (0.6, 1.4 and 5 mL), pH electrode, fraction collector cassette tray, 4 deep-well cassettes, 2 cassettes for 50mL tubes |
| Multiple sample injection | Yes, up to 7 samples |
| Multiple wavelength detection | Yes, up to 3 wavelengths |
| Multistep purification | Yes (optional) |
| Operating pressure (sample pump) max. | 10 MPa (100 bar, 1450 psi) |
| Operating pressure max. | 20 MPa (200 bar, 2900 psi) |
| Power consumption | 800 VA |
| Protection class | IP 21, wet side IP 22 |
| Pump type | Piston pump, metering type |
| Relative humidity | 20% to 95% (non condensing) |
| Safety certifications | 2006/42/EC (MD), 2004/108/EC (EMC), 1999/5/EC (R&TTE) |
| Tubing i.d. (flow path) | 0.75 mm |
| UV wavelength | 190–700 nm |
| Viscosity | 0.35–10 cP (system pump), 0.7–10 cP (sample pump) |
| Voltage | 100–120/220–240 VAC |
| Width | 860 mm |
| pH monitoring | 0–14 |
| Model | ÄKTA avant 25 |
ÄKTA avant 150
| 參數(shù) | ÄKTA avant 150 |
|---|---|
| Application | Fast and secure process development and scale-up |
| Application supported | Affinity chromatography, gel filtration/size exclusion chromatography, ion exchange chromatography, and hydrophobic interaction chromatography |
| Automatic buffer preparation | BufferPro |
| Autosampler injection | No |
| Buffer selection | 18 buffer inlets, option of up to 46 |
| Compliance | The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from Cytiva and connected only to other CE labeled Cytiva modules or other products as recommended. For regulatory details please see declaration of conformity. |
| Depth | 710 mm |
| Flow cell path length | 2 mm (optional 10 mm and 0.5 mm) |
| Flow rate | 0.01 mL/min-150 mL/min |
| Height | 660 mm |
| Includes | Accessory box, 3 mixer chambers (1.4, 5 and 15 mL), pH electrode, fraction collector cassette tray, 2 cassettes for 15 mL tubes, 4 cassettes for 50 mL tubes. |
| Multiple sample injection | Yes, up to 7 samples |
| Multiple wavelength detection | Yes, up to 3 wavelengths |
| Multistep purification | No |
| Operating pressure (sample pump) max. | 5 MPa (50 bar, 725 psi) |
| Operating pressure max. | 5 MPa (50 bar, 725 psi) |
| Power consumption | 800 VA |
| Protection class | IP 20 |
| Pump type | Piston pump, metering type |
| Relative humidity | 20% to 95% (noncondensing) |
| Safety certifications | 2006/42/EC (MD), 2004/108/EC (EMC), 1999/5/EC (R&TTE) |
| Tubing i.d. (flow path) | 0.75 mm |
| UV wavelength | 190–700 nm |
| Viscosity | 0.35 to 5 cP (system pump), 0.7 to 10 cP (sample pump) |
| Voltage | 100–120/220–240 VAC |
| Width | 860 mm |
| pH monitoring | 0–14 |
| Model | ÄKTA avant 150 |
