ADA400A 差分探頭 ADA400A 美國泰克差分探頭
Active Differential Preamplifier
10 μV/div Sensitivity
Typically 100 dB CMRR DC to 10 kHz
Integral Probe Power with TEKPROBE™ BNC
ADA400A 差分探頭 ADA400A 美國泰克差分探頭 金博宇科技專業代理的詳細資料
：
深圳市金博宇科技有限公司是專業從事測試儀器儀表設備的代理經銷售后服務集成商，并與國內外儀表生產廠商有著廣泛的技術與銷售合作.作為美國菲利爾FLIR、美國FLUKE、美國泰克、美國Keithley 、美國安捷倫Agilent、中國臺灣皇晶ACUTE、英國PEM、普源精電、青島青智、費思泰克,華誼儀表，中國臺灣固緯，德國惠美, 法國CA，中國臺灣品致，長盛儀器，美爾諾，等諸多國內外代理與經銷：主要銷售的測試儀器儀表有: 示波器、信號源、萬用表、熱像儀、電流電壓探頭、電子負載、電源、頻譜、等測試儀器。。
- Active Differential Preamplifier
- 10 μV/div Sensitivity
- Typically 100 dB CMRR DC to 10 kHz
- Integral Probe Power with TEKPROBE™ BNC
Applications
- Mechanical Analysis
- Audio Design
- Biomedical Research （Not Certified For Patient Connection）
- Medical Equipment （Not Certified For Patient Connection）
ADA400A
The ADA400A Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents which disturb the measurement or the circuit.
The high gain and extremely high common mode rejection provide usable measurements of voltages as low as 5 μV, even in high-noise environments. Selectable bandwidth limiting reduces normal mode noise from digital logic, switch mode power supplies, and line frequency sources. Adjustable differential offset allows the user to null out transducer bridge bias and galvanic potential from the test setup. An "infinite impedance" mode can be selected in the two highest gain ranges allowing accurate measurements of signals with high source impedance.
The ADA400A is powered directly from TDS400, TDS500, TDS600, TDS700, TDS5000, TDS7000 （TEKPROBE）, TDS7000 （TekConnect） w/ TCA-1MEG Series oscilloscopes. It may also be powered by a 1103 Probe Power Supply.
