上海湘昌自動化設備有限公司（西門子代理商）
:杜振林（)工程師?
：?? 傳真（）:
工作
:@163
24小時銷售技術咨詢：
地址：上海市松江區新浜工業園甪彭路18號
6ES7315-7TJ10-0AB0
SIMATIC S7-300, CPU 315T-3 PN/DP, CENTRAL PROCESSING UNIT FOR PLC AND TECHNOLOGY, 384 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE DP(DRIVE), 3. INTERFACE ETHERNET PROFINET WITH 2 PORT SWITCH, INTEGRATED I/O FOR TECHNOLOGY, FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD MIN. 8 MB NECESSARY
上海湘昌自動化設備有限公司（西門子代理商）
:杜振林（)工程師
： 傳真（）:
工作
:@163
24小時銷售技術咨詢：
地址：上海市松江區新浜工業園甪彭路18號
- SIMATIC CPU with integral Technology/Motion Control functionality
- With full standard CPU 315-2 PN/DP functionality (except for CBA)
- For cross-industry automation tasks in series machine, special machine and plant construction
- Ideal for synchronized motion, such as coupling to a virtual/real master, gear synchronization, cam disk, path interpolation, or print mark compensation
- 3D path interpolation with different kinematics
- Position and pressure-regulated hydraulic axes
- Used as central controller in production lines with central and distributed I/O
- With integrated I/O for high-speed technology functions (e.g. camming, reference point acquisition)
- PROFIBUS DP (DRIVE) interface for isochronous connection of drive components
- PROFINET interface with 2-port switch
- PROFINET I/O controller for operating distributed I/O on PROFINET
- One common S7 user program for control and motion control tasks (no additional programming language necessary for motion control)
- "S7 technology" option package required (version V4.2 SP3 and higher)
SIMATIC Micro Memory Card (8 MB) required for operation of the CPU.
Area of application
The CPU 315-3 PN/DP is used primarily in machines where a control with a large program memory coincides with high processing speed and motion control requirements, e.g.:
- Processing/assembly lines
- Carton erectors
- Palletizers
- Handling systems
- Flying shears
- Bottling plants
- Wrapping
- Labeling machines
- Roll feeds
- Portals with interpolation
A maximum of 8 axes can be controlled. Along with accurate single axis positioning, the module is suitable primarily for complex motion sequences such as coupling to form a virtual or actual master, gearing, cam, path interpolation or print mark correction.
As a result of its capacity, the CPU 315T-3 PN/DP is ideal for the use of SIMATIC Engineering Tools, e.g.:
- Programming with SCL
- Machining step programming with S7-GRAPH
Design
The CPU 315T-3 PN/DP has the same functionality as the high-performance CPU 315 as well as additional integrated functions for technology/motion control. Integrated, fast I/O for technical functions such as cam switching or home position detection round off the module.
The CPU 315T-3 PN/DP features:
- Microprocessor;
the processor can handle execution times of approx. 0.05 µs per binary instruction and 0.45 µs per floating-point instruction. The CPU 315T-3 PN/DP reaches very high processing speeds, particularly where word or double-word commands and 32 bit fixed-point commands are concerned. - 384 KB work memory (corresponds to approx. 128 K instructions);
the extensive work memory for program components relevant to execution offers sufficient space for user programs. SIMATIC Micro Memory Cards (8 MB) as load memory for the program also allow the project to be stored in the CPU (complete with symbols and comments) and can be used for data archiving and recipe management. - Integrated inputs and outputs
4 digital inputs and 8 digital outputs, can be used for technical functions such as home position detection (BERO) or rapid cam switching signals.
The digital inputs can also be used (with some restrictions) in the STEP 7 user program. - Flexible expansion;
up to 8 modules (single-tier configuration) - Combined MPI/DP interface;
The first MPI/DP integrated interface can establish as many as 32 connections simultaneously to S7-300/400 or connections to PG, PC, OP. Among these connections, one is always reserved for programming devices and another for OPs. A simple network with up to 32 CPUs can be configured with the MPI and "global data communication".
This interface can be reconfigured from an MPI to a PROFIBUS DP interface. The DP interface can be used as a DP master or as a DP slave. - PROFIBUS DP (DRIVE) interface:
The PROFIBUS DP (DRIVE) interface supports isochronous mode and therefore provides an essential requirement to control high-speed and time-critical operations, such as are found in distributed axes in synchronized applications. The interface can only be used as a DP master. It serves to connect drive components. DP-V0 slaves can also be operated on the DP (DRIVE) line on a limited basis in addition to drive systems. The connectable drives are specified in the technical specifications.
A list of the drives that can be operated on the DP-Drive can be found at:
http://support.automation.siemens.com - PROFINET
The third integral interface of the CPU 315T-3 PN/DP is a PROFINET interface with 2-port switch, based on Ethernet TCP/IP. It supports the following protocols:- S7 communication for data communication between SIMATIC controllers
- PG/OP communication for programming, commissioning and diagnostics through STEP 7
- PG/OP communication for interfacing to HMI and SCADA
- Open TCP/IP, UDP and ISO-on-TCP (RFC1006) communication over PROFINET
- SIMATIC NET OPC-Server for communication with other controllers and I/O devices with own CPU
Functions
The CPU 315T-3 PN/DP has the full functionality of the CPU 315-2 PN/DP (except for CBA). In addition, high-performance motion control functions are available.
The programming is carried out with STEP 7 as well as the option package S7-Technology.
The following kinematics are supported:
- Cartesian (two and three-dimensional)
- Roll picker
- Scara
- Articulated arm
- Delta2D picker
- Delta3D picker
The following motion control functions can be used with the CPU 315T-3 PN/DP:
- Basic functions
- MC_ReadSysParameter
- MC_Reset
- MC_WriteParameter
- Single-axis functions
- MC_ChangeDataset
- MC_Halt
- MC_Home
- MC_MoveAbsolute
- MC_MoveAdditive
- MC_MoveRelative
- MC_MoveSuperImposed
- MC_MoveToEndPos
- MC_MoveVelocity
- MC_Power
- MC_SetTorqueLimit
- MC_Stop
- Synchronous operation functions
- MC_CamIn
- MC_CamOut
- MC_GearIn
- MC_GearOut
- MC_Phasing
- Superimposed synchronous operation functions
- MC_CamInSuperImposed
- MC_CamOutSuperImposed
- MC_GearInSuperImposed
- MC_GearOutSuperImposed
- MC_PhasingSuperImposed
- Cam functions
- MC_CamClear
- MC_CamInterpolate
- MC_CamSectorAdd
- MC_GetCamPoint
- Other functions
- MC_CamSwitch
- MC_CamSwitchTime
- MC_ExternalEncoder
- MC_MeasuringInput
- MC_ReadPeriphery
- MC_ReadRecord
- MC_WritePeriphery
- MC_WriteRecord
- Drive functions
- MC_DriveDiagnostics
- MC_ReadDriveParameter
- MC_WriteDriveParameter
- Pressure/Force commands
- MC_ForceLimiting
- MC_ForceControl
- Path commands
- MC_SetCartesianTransform
- MC_GroupStop
- MC_GroupInterrupt
- MC_GroupContinue
- MC_MoveLinearAbsolute
- MC_MoveLinearRelative
- MC_MoveCircularAbsolute
- MC_MoveCircularRelative
- MC_MovePath
- MC_PathSelect
- MC_MovePolynomialAbsolute
- MC_MovePolynomialRelative
- MC_ZoneCheck
- MC_GroupSyncConveyorBelt
- MC_RedefineTrackingPos
- MC_MoveCircles
SMRAT CPU
*處理單元 CPU 訂貨號
CPU SR20 CPU 模塊，AC/DC/RLY，12 輸入/8 輸出6ES7 288-1SR20-0AA0
CPU SR40 CPU 模塊，AC/DC/RLY，24 輸入/16 輸出6ES7 288-1SR40-0AA0
CPU ST40 CPU 模塊，DC/DC/DC，24 輸入/16 輸出6ES7 288-1ST40-0AA0
CPU CR40 CPU 模塊，AC/DC/RLY，24 輸入/16 輸出6ES7 288-1CR40-0AA0
CPU SR60 CPU 模塊，AC/DC/RLY，36 輸入/24 輸出6ES7 288-1SR60-0AA0
CPU ST60 CPU 模塊，DC/DC/DC，36 輸入/24 輸出6ES7 288-1ST60-0AA0
擴展模塊 EM 訂貨號
EM DI08 數字量輸入模塊，8 x 24 V DC 輸入6ES7 288-2DE08-0AA0
EM DR08 數字量輸出模塊，8 x 繼電器輸出6ES7 288-2DR08-0AA0
EM DR16 數字量輸入/輸出模塊，8 x 24 V DC 輸入/8 x 繼電器輸出6ES7 288-2DR16-0AA0
EM DR32 數字量輸入/輸出模塊，16 x 24 V DC 輸入/8 x 繼電器輸出6ES7 288-2DR32-0AA0
EM DT08 數字量輸入/輸出模塊，8 x 24 V DC 輸出6ES7 288-2DT08-0AA0
EM DT16 數字量輸入/輸出模塊，8 x 24 V DC 輸入/8 x 24 V DC 輸出6ES7 288-2DT16-0AA0
EM DT32 數字量輸入/輸出模塊，16 x 24 V DC 輸入/16 x 24 V DC 輸出6ES7 288-2DT32-0AA0
EM AI04 模擬量輸入模塊，4 輸入6ES7 288-3AE04-0AA0
EM AQ02 模擬量輸入模塊，2 輸出6ES7 288-3AQ02-0AA0
EM AM06 模擬量輸入/輸出模塊，4 輸入/2 輸出6ES7 288-3AM06-0AA0
EM AR02 熱電阻輸入模塊，2 通道6ES7 288-3AR02-0AA0
信號板 SB 訂貨號
SB CM01 通信擴展信號板，R485/R232 6ES7 288-5CM01-0AA0
SB DT04 數字量擴展信號板，2 x 24 V DC 輸入/2 x 24 V DC 輸出 6ES7 288-5DT04-0AA0
SB AQ01 模擬量擴展信號板，1 x 12 位模擬量輸出6ES7 288-5AQ01-0AA0
附件訂貨號
PS207 PLC 電源 24 V DC/2.5 A 6EP1 332-1LA00
PS207 PLC 電源 24 V DC/4 A 6EP1 332-1LA10
CSM1277 以太網交換機，4 端口6GK7 277-1AA00-0AA0
SIMATIC HMI 訂貨數據
HMI 操作面板 訂貨號
Smart 700 IE Smart 700 IE，7 寸觸摸屏6AV6 648-0BC11-3AX0
Smart 1000 IE Smart 1000 IE，10.2 寸觸摸屏6AV6 648-0BE11-3AX0
TD400C 藍色背光 LCD，4 行文本顯示器，可自定義前面板6AV6 640-0AA00-0AX0
S7-300 CPU
CPU312 6ES7312-1AE14-0AB0
CPU314 6ES7314-1AG14-0AB0
CPU315-2DP 6ES7315-2AH14-0AB0
CPU315-2PN/DP 6ES7315-2EH14-0AB0
CPU317-2DP 6ES7317-2AK14-0AB0
CPU317-2PN/DP 6ES7317-2EK14-0AB0
CPU319-3PN/DP 6ES7318-3EL01-0AB0
CPU312C 6ES7312-5BF04-0AB0
CPU313C 6ES7313-5BG04-0AB0
CPU313C-2PTP 6ES7313-6BG04-0AB0
CPU313C-2DP 6ES7313-6CG04-0AB0
CPU314C-2PTP 6ES7314-6BH04-0AB0
CPU314C-2DP 6ES7314-6CH04-0AB0
CPU314C-2PN/DP 6ES7314-6EH04-0AB0
CPU315T-2DP 6ES7315-6TH13-0AB0
CPU317T-2DP 6ES7317-6TK13-0AB0
CPU317TF-2DP 6ES7317-6TF14-0AB0
S7-200 CPU
CPU221 6ES7211-0AA23-0XB0 6ES7211-0BA23-0XB0
CPU222 6ES7212-1AB23-0XB0 6ES7212-1BB23-0XB0
CPU224 6ES7214-1AD23-0XB0 6ES7214-1BD23-0XB0
CPU224XP 6ES7214-2AD23-0XB0 6ES7214-2BD23-0XB0
CPU224XPSI 6ES7214-2AS23-0XB0
S7-400 CPU
CPU412 6ES7412-1XJ05-0AB0 6ES7412-2EK06-0AB0 6ES7412-2XJ05-0AB0
CPU414 6ES7414-2XK05-0AB0 6ES7414-3EM06-0AB0 6ES7414-3XM05-0AB0
CPU416 6ES7416-2XN05-0AB0 6ES7416-3ES06-0AB0 6ES7416-3XR05-0AB0
CPU417 6ES7417-4XT05-0AB0
