Application
The condensate collection vessels TG.. / TK..
are specially designed for application in the
analysis technique and are used as condensate
collecters in applications where auomatic
condensate removal is impossible, as
e.g. for gas coolers, or where undesired small
amounts of condensate occur.
When using peristaltic pumps as automatic
condensate removal and expecting a high
quantity of liquid carry over, the condensate
collection vessel can also be used as a buffer
vessel.
For safe operation, the condensate vessels
can be equipped with a liquid-level alarm.
Description
The M&C condensate collection vessels TG1
and TG10 are made of industrial quality glass.
This allows high resistance against corrosion
as well as the ability to see inside the vessel.
A GL25-12 mm clamp connector is provided
for condensate inlet and in the case of the
TG1 design also for an optional liquid alarm
sensor (not in TG10) which is supplied sealed
with a blank cover.
The outlet valve is fitted with a PTFE stopcock,
ensuring easy access and hermetic sealing. All
sample contacting parts are out of glass and
PTFE. A wall mounting plate is supplied as
part of standard delivery. The TG1/LA 1 design
is supplied compley with a liquid sensor
LA1 for conducting media and includes
electronic LA 1.1 in a wall mounting housing.
Special connector adapters for the connection
of tubes to GL glass connections can be
supplied optionally.
The M&C condensate vessels TK10-TK12/LA5
are made of PVC transparent. This allows
high resistance against corrosion as well as
the ability to see inside the vessel. Version
TK12/LA5 has got a G3/8» connection for the
condensate inlet. For additional junctions, the
condensate vessel TK10 has got two extra
G1/4» connections which are sealed with a
blank cover.
The condensate collection vessels TK11 and
TK12/LA5 have got a connection thread M28
for the level switch LA5. The condensate vessel
TK12/LA5 is completed with an integrated
level switch LA5 and 1m connection cable
LIYY 2x 0,14 mm2.
The hand drain valve from the TK10-TK12/LA5
is sealed with an FPM o-ring, this provides an
easy handling and guarantees a proper sealing.
Three additional G1/4» threads provide
the possibility for easy vertical or horizontal
connection. The horizontal connections are
sealed with blank cover.
The wall mounting carriers are included.
The 10 litre M&C condensate collection vessel
TK13 and TK13/LA5 with handle and stopcock
are made of PE. For condensate inlet and
ventilation there are three tube connections
DN4/6 mm on the TK13 and TK13/LA5.
The condensate collection vessel TK13/LA5 is
complied with an integrated level switch LA5
and 1m connection cable LIYY 2x 0,14 mm2.
The level switch LA5 is supplied from the factory
as a normal open contact.
If you need a normal close contact, turn the
float 180°.