防爆安全溫度計(THERMO) 型號:TP9

庫號：M214985   查看hh

midwest-group
適用范圍：
油罐測量
散裝液體
密閉輸送
鐵路
駁船
油罐卡車

全新的TP9電路板升級，使測試結果更加精確.
TP9為電池供電，兩節AA電池，可以讓機器運行200小時，長時間不用20分鐘自動關機.
測試過程中顯示屏?xí)ㄟ^(guò)箭頭的的指示，提示使用者溫度在上升階段，下降階段或者平穩階段.
機器出現問題，會通過代碼顯示，提示錯誤原因

背光照明功能：周圍光線太暗的情況下，機器背光燈自動開啟
溫度轉換鍵：機器有攝氏度和華氏度轉換按鈕，供客戶選擇

測溫范圍：-40 to +400°F
-40 to +204°C

誤差：
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C


2節AA堿性電池壽命約200小時
外殼材料：
不銹鋼

探針
304不銹鋼

大尺寸：
10“×4.25”x 6.4“W






The TP9 employs the proven RTD design that has been used in the TP7 and TP8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A stainless steel enclosure protects the circuit board and large LCD from penetration by impact, water and reactive liquids.
The new TP9 circuit board is an evolutionary step up from our highly accurate, reliable and successful TL1 laboratory thermometer. The Power Button’s primary function powers the instrument for intervals of about 20 minutes since the last button was accessed. The Power Button can also be used to conserve power and clear the memory, or to make adjustment while in calibration mode. A simple menu operation is displayed by holding the Function Button, and alternay functions to allow adjustments in the calibration mode. Arrows on the left side of the display show the direction of the temperature reading and whether stability has been reached. At the user’s discretion stabilized temperatures can be logged at numerous liquid levels for a running average and later displayed for the user’s documenting purposes. But this feature never interferes with simply getting an accurate temperature reading.
To endure the environment and be intrinsically safe, the TP 9 is manufactured of materials, which are both immune to petrochemicals and are non-sparking. The enclosure is made of stainless steel. The probe assembly is constructed using non-stick cable and stainless steel sensor components.


Specifications
Maximum Dimensions:
10”L x 4.25”H x 6.4” W


Probe
304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA
Cable Jacket, Coaxial Construction


Enclosure Material:
Stainless Steel
Acetal (Delrin) Probe Holder
Polyvinylchloride Faceplate
Stainless Steel Fasteners

Batteries:
2 AA Alkaline; Battery Life of approximay 200 hours
Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is extremely low or high.


Temperature:
Resolution 0.01
Range: -40 to +400°F
-40 to +204°C
Calibrated Accuracy:
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
4 Point NIST Traceable Report of Test
Long-term drift not to exceed 0.05%/year
Meets API requirements