| SPECIFICATIONS | | Specifications | Accuracy | | EXCITATION | 5 steps : 1V, 2V, 5V, 7.5V, 10V
Current : 170mA, max.
Remote sence error : 0.0005%/Ω at lead resistance (350Ω load)
Noise and ripple : 0.05% p-p, max (dc 10kHz)
Stability : ± 0.02%/℃ | | INPUT | STRAIN GAUGE :
quarter, half or full bridge (50~1000Ω)
Built-in 120Ω and 350Ω dummy resister
TRANSDUCER :
Piezoresistive strain gauge types,potentiometer,DCDT transducers displacement. | | AMPLIFIER | 1st Gain : ×1, ×10, ×100, ×400, ×1000 5steps (accuracy ±1%)
2nd Gain : ×1~×11 continuously variable
Vernier multiplier : 10-turn counting knob with direct readout (×1~×11)
Fine Adjust
Frequence response : 100kHz (-3dB), max
Input resistance : 1GΩ, differential or common mode
Input capacitance : 4pF, differential or common mode
Input voltage range :
± 10V, differential mode
12V-(G/2× Vd), common mode (Vd = actual differential input voltage)
Bias current : ± 30nA, typical, each input
Common-mode rejection (G=100) : 100dB, min, dc to 60Hz with 1kΩ source imbalance
Stability (G<1000) : 5ppm/℃, max
Noise (G=100) : 0.01~10Hz, 0.3μVp-p R.T.I | | FILTER | Characteristic : low-pass active 2-pole Butterworth standard
Frequencies (-3dB) : 10Hz, 100Hz, 1kHz, 10kHz, wide-band | AMPLIFIER OUTPUT
(BNC CONNECTOR) | Output 1 : ±10V @100mA max
Output 2 ; ±10V @10mA max
Linearity : ±0.01% | | VOLTAGE DISPLAY | Display character : 7-segment 4-digits LED
Display range : 0.000V ~ ± 10.00V | | GAIN | 5 steps Amplilfier (x1, x10, x100, x400, x1000) | | FREQUENCY RESPONSE | 100kHz (-3dB), Max | | BRIDGE BALANCE | Auto ranging : ± 4000με (2mV/V)
Auto balance time : 1 second, typical
Manual balance range : ± 1V
Storage : non-volatile data memory (EEPROM) | LOW PASS FILTER
| 4 steps 10Hz, 100Hz, 1kHz, 10kHz (-3dB) | | LINEARITY | ±0.01% | | STABILITY | ±0.01%℃ | | SHUNT CALIBRATION | Bridge resistance 120Ω : 200με and 2000με calibrations
Bridge resistance 350Ω : 200με and 2000με calibrations | INPUT IMPEDANCE
| more than 1GΩ | | POWER | AC 110V or 220V (switch selected), 50/60Hz, 7.5watts | | 3-wirecode ( 2-wire : power / 1-wire : Ground) | |
| | DIMENSIONS | | |
|
