Hawke防爆連接器Hawke Instrum Ex connector
Hawke防爆連接器Hawke Instrum Ex connector
上海頤品自動化，：

Hawke  Instrum Ex connector

Hazardous Area Connector

Tamb: -40°C to +60°C. II2 GD Exdbe IIC Extb IIIC Db T85 IP66, 67 & DTS01 deluge protected.

Overview

This revolutionary design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. The Instrum connector is available in two sizes:

The 4-way and the 9-way options will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC and 2.5A (DC1) 60V DC.

The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC and 0.5A (DC1) 60V DC.

Instrum connectors include an integral Hawke cable gland for easy termination of both armoured and un-armoured cables.

How it works

The InstrumEx connectors are designed to provide ease of installation and speed of use, whilst providing a flexible safe and reliable method for mating and disconnection of circuits which are energised.

The two mating halves are easily engaged and disengaged by two full turns of the ACME custom engaging thread, during which time the pins and socket are protected by the Exd flameproof protection concept. The outer shell of the connector combined with the integral Hawke cable gland seal ensure that the internal connections are protected to the Exe increased safety protection concept.

Instrum Connector Dimensions

Technical Data (4 Way / 9 Way)

TECHNICAL DATA - 4 WAY / 9 WAY
Explosion Protection	II2 GD Exdbe IIC Gb Extb IIIC Db T85°C
Ambient Temperature	-40°C to +60°C
Certification	Baseefa 06 ATEX 0061X
	IECEx BAS06.0018X
Ratings 4 Way / 9 Way	Voltage AC 250V
	Current AC EN 60947-4-3 10A (AC21)
	Current AC EN 60947-4-1 10A (AC1)
	Current AC EN 60947-4-1 1A (AC3)
	Frequency 50/60 Hz
	Power Factor 0.9
	Voltage DC 60V
	Current DC EN 60947-4-3 2.5A (DC21)
	Current DC EN 60947-4-1 2.5A (DC1)
	Current DC EN 60947-4-1 0.5A (DC3)
Fuse Rating 4 Way / 9 ay	10 amp without thermal protection
	20A gL with thermal protection
Maximum No. of make & break operation (EN61984)	On load 150
	Off load 500
IP Rating	IP66, IP67 and DTS01 deluge protected. Note: Caps to be fitted to maintain IP ratings when the connector halves are separated
Storage Temperature	-50°C to +70°C

Technical Data (8 way)

TECHNICAL DATA - 8 WAY
Explosion Protection	II2 GD Exdbe IIC Gb Extb IIIC Db T85°C
Ambient Temperature	-40°C to +60°C
Certification	Baseefa 06 ATEX 0061X
	IECEx BAS06.0018X
Ratings 8 Way	Voltage AC 60V
	Current AC EN 60947-4-3 1A (AC21)
	Current AC EN 60947-4-1 1A (AC1)
	Current AC EN 60947-4-1 0.1A (AC3)
	Frequency 50/60 Hz
	Power Factor 0.9
	Voltage DC 60V
	Current DC EN 60947-4-3 0.5A (DC21)
	Current DC EN 60947-4-1 0.5A (DC1)
	Current DC EN 60947-4-1 0.1A (DC3)
Fuse Rating 8 Way	0.5 amp without thermal protection
	1A gL with thermal protection
Maximum No. of make & break operation (EN61984)	On load 150
	Off load 500
IP Rating	IP66, IP67 and DTS01 deluge protected. Note: Caps to be fitted to maintain IP ratings when the connector halves are separated
Storage Temperature	-50°C to +70°C

Order Codes

When ordering, select the relevant code from each block as shown in the example below:
Instrum/N-BR1-M-B-P-X-0-4-X-A

Instrum	Select Code	Description	Example Code
Material	N	Nickel Plated Brass	N
	S	Stainless Steel
Connector Style	CP	Connector Plug	BR1
	FP	Flange Mounted Connector Plug
	CR	Connector Receptacle
	FR	Flange Mounted Connector Receptacle
	BR1	Bulkhead Receptacle (Fixed Position 1 Standard)
	BR2	Bulkhead Receptacle (Fixed Position 2)
	BR3	Bulkhead Receptacle (Fixed Position 3)
	BR4	Bulkhead Receptacle (Fixed Position 4)
	BR5	Bulkhead Receptacle (Fixed Position 5)
Bulkhead Entry Thread	M	Metric Thread (M20 4/8-way / M32 9-way)	M
	N	NPT Thread ( ½" for 4/8-way / ¾" 9-way)
	R	NPT Alternative Thread ( ¾" for 4/8-way / 1" 9-way)
	X	N/A (for Connector Plug or Connector Receptacle)
Cross Sectional Area * Bulkhead Receptacle will always be pre-terminated with 1.5mm² conductors, irrespective of cross sectional area.	A	4 x 0.5 - 1mm² *	B
	B	4 x 1.5 - 2.5mm² *
	C	8 x 0.14 - 0.37mm²
	D	9 x 0.5 - 1mm²
	E	9 x 1.5 - 2.5mm²
Insert Type ** Note: In all installations the "live" side of the connector must always contain the socket insert.	P	Pin Insert **	P
	S	Socket Insert **
Outer Sheath Diameter	S	Cable Gland Seal 5.5 - 16mm (4-way/8-way)	X
	A	Cable Gland Seal 12.5 - 20.5mm (9-way)
	B	Cable Gland Seal 16.9 - 26mm (9-way)
	X	N/A (Bulkhead Receptacle)
Bulkhead Receptacle Cable Length	0	0.5m (standard)	0
	1	1m
	2	2m
	C	Customer Specified
	X	N/A (for Connector Plug and Receptacle)
Bulkhead Receptacle Pin Quantities # Bulkheads also include an additional earth lead.	4	4 (pins 1-4 terminated) Std. 4-way BR#	4
	3	3 (pins 1,2 and 3 terminated)#
	8	8 (pins 1-8 terminated) Std. 8-way BR#
	9	9 (pins 1-9 terminated) Std. 9-way BR#
	C	Customer Specified
	RJA	RJ45 Jack fitted, wired to T-568A
	RJB	RJ45 Jack fitted, wired to T-568B
	RJC	Customer Specified
	X	N/A (for Connector Plug and Receptacle)
Armour Clamp Size ** Note: See Clamping Ring table	R	Alternative Clamping Rings B only	X
	X	N/A (Bulkhead Receptacle)
	S	Standard Clamping Ring O,A,B
	U	Unarmoured/Copper Braid Clamp (in addition to Clamping Rings)
Certification	A	ATEX/IECEx/EAC/Inmetro/NEC505	A

Find A Connector Modifier

Ordering Information

For ordering information and codes, please see order codes tab.

Order Codes

When ordering, select the relevant code from each block as shown in the example below:
Instrum/N-BR1-M-B-P-X-0-4-X-A

Instrum	Select Code	Description	Example Code
Material	N	Nickel Plated Brass	N
	S	Stainless Steel
Connector Style	CP	Connector Plug	BR1
	FP	Flange Mounted Connector Plug
	CR	Connector Receptacle
	FR	Flange Mounted Connector Receptacle
	BR1	Bulkhead Receptacle (Fixed Position 1 Standard)
	BR2	Bulkhead Receptacle (Fixed Position 2)
	BR3	Bulkhead Receptacle (Fixed Position 3)
	BR4	Bulkhead Receptacle (Fixed Position 4)
	BR5	Bulkhead Receptacle (Fixed Position 5)
Bulkhead Entry Thread	M	Metric Thread (M20 4/8-way / M32 9-way)	M
	N	NPT Thread ( ½" for 4/8-way / ¾" 9-way)
	R	NPT Alternative Thread ( ¾" for 4/8-way / 1" 9-way)
	X	N/A (for Connector Plug or Connector Receptacle)
Cross Sectional Area * Bulkhead Receptacle will always be pre-terminated with 1.5mm² conductors, irrespective of cross sectional area.	A	4 x 0.5 - 1mm² *	B
	B	4 x 1.5 - 2.5mm² *
	C	8 x 0.14 - 0.37mm²
	D	9 x 0.5 - 1mm²
	E	9 x 1.5 - 2.5mm²
Insert Type ** Note: In all installations the "live" side of the connector must always contain the socket insert.	P	Pin Insert **	P
	S	Socket Insert **
Outer Sheath Diameter	S	Cable Gland Seal 5.5 - 16mm (4-way/8-way)	X
	A	Cable Gland Seal 12.5 - 20.5mm (9-way)
	B	Cable Gland Seal 16.9 - 26mm (9-way)
	X	N/A (Bulkhead Receptacle)
Bulkhead Receptacle Cable Length	0	0.5m (standard)	0
	1	1m
	2	2m
	C	Customer Specified
	X	N/A (for Connector Plug and Receptacle)
Bulkhead Receptacle Pin Quantities # Bulkheads also include an additional earth lead.	4	4 (pins 1-4 terminated) Std. 4-way BR#	4
	3	3 (pins 1,2 and 3 terminated)#
	8	8 (pins 1-8 terminated) Std. 8-way BR#
	9	9 (pins 1-9 terminated) Std. 9-way BR#
	C	Customer Specified
	RJA	RJ45 Jack fitted, wired to T-568A
	RJB	RJ45 Jack fitted, wired to T-568B
	RJC	Customer Specified
	X	N/A (for Connector Plug and Receptacle)
Armour Clamp Size ** Note: See Clamping Ring table	R	Alternative Clamping Rings B only	X
	X	N/A (Bulkhead Receptacle)
	S	Standard Clamping Ring O,A,B
	U	Unarmoured/Copper Braid Clamp (in addition to Clamping Rings)
Certification	A	ATEX/IECEx/EAC/Inmetro/NEC505	A

Find A Connector Modifier

Ordering Information

For ordering information and codes, please see order codes tab.

中國區分銷商：
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.

Website:www.epinautomation。。ｃｏｍ
:sales@epinautomation.com
*: