Hawke防爆附件Hawke Enclosure Accessories
Hawke防爆附件Hawke Enclosure Accessories
上海頤品自動化，：

Hawke Internal/External Earth Stud

Enclosure Accessories

Technical Data

1. Increased Safety M6 or M8 Stainless Steel stud.
2. Ingress Protection for PL Series Enclosures: IP66 and IP67 to IEC/EN 60529.
3. Deluge protection to DTS01.

Hawke 389 Breather Drain and Locknut

Accessories

Increased Safety Exe / Dual Certified ATEX - IECEx

General Information

M20 and M25 with 1.5mm pitch as standard.
Longer thread lengths are available on request.

Materials & Finishes

Manufactured in Brass, Nickel Plated Brass, Stainless Steel – Grade 316L. O Ring manufactured from Silicone Rubber.

General Information

M20 and M25 with 1.5mm pitch as standard.
Longer thread lengths are available on request.

Materials & Finishes

Manufactured in Brass, Nickel Plated Brass, Stainless Steel – Grade 316L. O Ring manufactured from Silicone Rubber.

Technical Data

1. Increased Safety Exe I Mb, Exe IIC Gb, Extb IIIC Db, I M2 / II 2GD.
2. Certificate No's
   Baseefa11ATEX0153X and IECEx BAS 11.0075X.
3. Suitable for use in:
   Zone 1, Zone 2, Zone 21, Zone 22 and mining applications.
4. Construction and Test Standards:
   IEC/EN 60079-0, IEC/EN 60079-7 and IEC/EN 60079-31.
5. Ingress Protection:
   IP66.
6. Operating Temperature Range:
   Nitrile ‘O’ Ring fitted as standard -60°C to +80°C.
   Silicone Option -60°C to +160°C.
7. Group I, II and III.

Assembly Instructions

Ordering Format [ Product / Thread Size / Pitch / Material / Finish ]

Example: 389 / M25 / 1.5mm / Brass / Nickel Plated

Hawke 489 Breather Drain

Accessories

Flameproof Exd / Dual Certified ATEX - IECEx

General Information

The Breather Drain may only be fitted to the underside of Exd enclosures with internal volumes of 2.5 litres or less.
Nitrile O Ring supplied as standard, Silicone option available.
M20 and M25 with 1.5mm pitch as standard.
Other thread options available on request, including BSPP, PG, NPT, ET and NPSM.

Materials & Finishes

Manufactured in Brass, Nickel Plated Brass, Stainless Steel – Grade 316L.

Technical Data

1. Flameproof Exd I Mb, Exd IIC, Extb IIIC Db IM2 / II 2GD.
2. Certificate No's
   Baseefa11ATEX0154X and IECEx BAS 11.0076X.
3. Suitable for use in:
   Zone 1, Zone 2, Zone 21, Zone 22 and mining applications.
4. Construction and Test Standards:
   IEC/EN 60079-0, IEC/EN 60079-1, EN60079-7 & EN60079-31.
5. Ingress Protection:
   IP66.
6. Ambient Temperature Range:
   -60°C to +60°C.
7. Temperature Classification:
   T6
8. Group I, II and III.

Assembly Instructions

Ordering Format [ Product / Thread Size / Material / Finish ]

Example: 489 / M20 / Brass / Nickel Plated

Hawke Terminal Block Type HTB6

Technical Data

1. Increased Safety II 2 GD
2. Certificate No's
   Baseefa08ATEX0266U and IECEx BAS 08.0085U.
3. Construction and Test Standards:
   IEC/EN 60079-0, IEC/EN 60079-7.

Hawke Pillar Earth Terminal Type PET5

Technical Data

1. Increased Safety II 2 GD
2. Certificate No's
   Baseefa09ATEX0035U and IECEx BAS 09.0010U.
3. Construction and Test Standards:
   IEC/EN 60079-0, IEC/EN 60079-7.

Hawke Back Plate / Mounting Plate

General Information

General Information

1. The GRP enclosures, manufactured by Hawke International, are the ultimate in robust GRP construction - well above the levels required for certification. Certain GRP enclosures are designed to withstand impact resistance up to 20Nm with the requirement for Exe enclosures at just 7Nm.
2. The GRP range, combined with the new Hawke mounting plate, offers the installer even greater ease of fitting. The external mounting feet of the range eliminates the need to remove the lid when mounting the enclosure on the Hawke mounting plate, preventing any foreign materials entering the enclosure during installation and eliminating the need for hot work permits.
3. Hawke mounting plates are available to mount any of the PL6 or PL7 series range of enclosures and can be used on walls, pipes as well as unistrut. They are stainless steel in construction and have multiple mounting holes allowing greater on-site flexibility. The mounting plates also allow for the fitting of customer labels.

Hawke Drop-In Plate

General Information

General Information

1. The stainless steel enclosures, sizes 1 through 9, are available with an optional "drop-in" mounting plate, facilitating the installation and termination of cabling and associated termination equipment.
2. The plates, constructed from galvanised steel as standard, will allow the easy mounting of various equipment sizes and types. All complex termination, wiring and mounting procedures can then take place outside of the confines of the enclosure.
3. For sizes S1, the plate is fitted with two fixing positions, all other sizes have four fixing positions.

中國區分銷商：
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.

Website:www.epinautomation。。ｃｏｍ
:sales@epinautomation.com
*: