CMP-B367鎧裝非防爆格蘭（CMP B367 Insulated Cable Gland）-上海頤品自動化科技有限公司

CMP-B367鎧裝非防爆格蘭（CMP B367 Insulated Cable Gland）

B367 | Insulated Cable Gland

For all types of Braid & Tape Armoured Cables

上海頤品自動化科技有限公司，：

Insulated Industrial Cable Gland

• Metal-to-metal armour clamping
• Permanently crimped, low impedance earth termination
• Secure against self-loosening
• Direct & remote installation
• Enables zoning of earthed neutral systems
• Eliminates circulating currents
• High capacity external earth connection (B367)
• Third party short circuit tested
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60?C to +130?C
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.

Note: Earth Tags can only be fitted to the B368 & A368 ZEN Cable Gland types.

The Symmetrical Fault Current (kA) rating for 1 second applicable to the Cast Integral Earth Lug featured in the B367 and A367 products are as follows:
• 26.0 kA for Cable Gland sizes up to 40
• 43.0 kA for Cable Gland sizes 50S and above

Please refer to the CMP CW CIEL product page for dimensional details of the Cast Integral Earth Lug feature included in the B367 and A367 designs.

Aluminium version available for AWA cables. When ordering please substitute letter B in B324 & B348 with letter A.

PRODUCT SELECTION TABLE

CLICK HERE TO VIEW TECHNICAL ILLUSTRATION

TECHNICAL ILLUSTRATION

CLICK HERE TO VIEW HOW TO ORDER

Showing: Imperial Metric

Cable Gland Size	Clearance Hole Diameter "C"	Cable Bedding Diameter "A"	Overall Cable Diameter "B"		Armour Range † Grooved Cone (X)		Across Flats "D"	Across Corners "D"	Protrusion Length "F"	Ordering Reference (Brass Metric)	Cable Gland Weight (Kgs)
Cable Gland Size	Clearance Hole Diameter "C"	Max	Min	Max	Min	Max	Across Flats "D"	Across Corners "D"	Protrusion Length "F"	With CIEL Lug (B367)	Cable Gland Weight (Kgs)
20S	20.6	11.6	9.5	15.9	0.3	1.0	24.0	26.4	58.6	20SB3671RA	0.160
20	20.6	13.9	12.5	20.9	0.4	1.0	30.5	33.6	59.9	20B3671RA	0.220
25S	25.6	19.9	14.0	22.0	0.4	1.2	37.5	41.3	69.1	25SB3671RA	0.340
25	25.6	19.9	18.2	26.2	0.4	1.2	37.5	41.3	69.1	25B3671RA	0.340
32	32.6	26.2	23.7	33.9	0.4	1.2	46.0	50.6	67.6	32B3671RA	0.440
40	40.6	32.1	27.9	40.4	0.4	1.6	55.0	60.5	73.1	40B3671RA	0.710
50S	50.7	38.1	35.2	46.7	0.4	1.6	61.2	66.0	72.1	50SB3671RA	0.820
50	50.7	44.0	40.4	53.0	0.6	1.6	70.1	77.1	74.2	50B3671RA	1.060
63S	63.7	49.9	45.6	59.4	0.6	1.6	75.0	82.5	86.2	63SB3671RA	1.510
63	63.7	55.9	54.6	65.8	0.6	1.6	80.0	88.0	86.1	63B3671RA	1.530
75S	75.7	61.9	59.0	72.0	0.6	1.6	90.0	99.0	96.5	75SB3671RA	2.100
75	75.7	67.9	66.7	78.4	0.6	1.6	100.0	110.0	95.3	75B3671RA	2.620
90	90.8	79.4	76.2	90.3	0.8	1.6	114.3	125.7	107.6	90B3671RA	3.740
Dimensions are displayed in millimetres unless otherwise stated