高質量隔爆型防爆操作柱　增安型防爆操作柱 ZX系列 防爆操作柱

五：型號含義：

安裝、使用與維修

﹒安裝前應檢查本產品銘牌上所列基本數據是否與實際使用條件相符

﹒產品應可靠接地

﹒無論何種接線須將引入裝置密封圈壓。

﹒維修時必須切斷前級電源后開蓋

﹒引入裝置密封圈和橡膠墊均采用耐油橡膠3001制造，用戶在使用、

維修過程中若發現老化應與制造廠定購，并及時更換以確保防

爆性能

﹒在隔爆面上均勻涂以204-1防銹油脂后在投入使用

﹒周圍環境溫度為-20～+40⁰C

﹒周圍空氣相對濕度不大于95%

﹒在無顯著搖動和沖出振動的地方

﹒污染等級為3級

﹒無破壞金屬和絕緣的腐蝕性氣體或蒸汽的地方

□Installation usage, maintenance.

﹒Check the data before install it.

﹒Product should be link to ground.

﹒Cable should pressurized in to airproof quoit.

﹒cut off power before maintenance.

﹒In-build System and the rubber circle are made of oil-proof 3001, you

should contact our factory if the airproof quoit is damaged.

﹒Mop up 204-4 antirust grease before use it.

﹒The environment temperature is-20～+40⁰C

﹒The relative humidity of the air around the equipment is not over95%

﹒No distinct shaking,concussion and libration

﹒The pollution grade is 3

﹒No corrosive gas and steam which can destroy the insulation of the metal

安裝、使用與維修

﹒安裝前應檢查本產品銘牌上所列基本數據是否與實際使用條件相符

﹒產品應可靠接地

﹒無論何種接線須將引入裝置密封圈壓。

﹒維修時必須切斷前級電源后開蓋

﹒引入裝置密封圈和橡膠墊均采用耐油橡膠3001制造，用戶在使用、

維修過程中若發現老化應與制造廠定購，并及時更換以確保防

爆性能

﹒在隔爆面上均勻涂以204-1防銹油脂后在投入使用

﹒周圍環境溫度為-20～+40⁰C

﹒周圍空氣相對濕度不大于95%

﹒在無顯著搖動和沖出振動的地方

﹒污染等級為3級

﹒無破壞金屬和絕緣的腐蝕性氣體或蒸汽的地方

□Installation usage, maintenance.

﹒Check the data before install it.

﹒Product should be link to ground.

﹒Cable should pressurized in to airproof quoit.

﹒cut off power before maintenance.

﹒In-build System and the rubber circle are made of oil-proof 3001, you

should contact our factory if the airproof quoit is damaged.

﹒Mop up 204-4 antirust grease before use it.

﹒The environment temperature is-20～+40⁰C

﹒The relative humidity of the air around the equipment is not over95%

﹒No distinct shaking,concussion and libration

﹒The pollution grade is 3

﹒No corrosive gas and steam which can destroy the insulation of the metal