NORGREN比例壓力閥6015461
適用范圍高精流技術參數質:濾精度為5μm的除油壓縮空輸出壓力:
響應時間: bar:小于 0.5 取決于輸入階躍信號從10%變道90%和
0 ... 10 V 0,2 ... 1 VP1001BJ100A004 ... 20
 mA 0,2 ... 1 VP1001BJ400A00 ... 10 V 0,2
... 2 VP1002BJ100A00
4... 20 mA 0,2 ... 2 VP1002BJ400A00
0 ... 10 V 0,2 ... 4 VP1004BJ100A00
4 ... 20 mA 0,2 ... 4 VP1004BJ400A00
0 ...0 V 0,14 ... 6 VP1006BJ101A00
4 ... 20 mA 0,14 ... 6 VP1006BJ401A00
0 ... 10 V 0,14 ... 8 VP1008BJ101A00
 

NORGREN比例壓力閥6015461
4 ... 20 mA 0,14 ... 8 VP1008BJ401A00
0.2 ~1.0bar,0.2 ~ 2.0bar,0.2 ~ 4.0bar (2線14 ~6bar,0.14 ~ 8bar (3線)流量:
因而A2>A1，故活塞上方液壓作用力大于活塞下方液壓作用力。在P1、P2同步增長
過程中當活塞上、下兩端液壓作用之差過彈簧3的預緊力時，活塞便開始下移
 growth process when the piston, when the difference between the
lower ends of the hydraulic spring preload effect exceeds 3, the piston starts
。當P1和P2增長到一定值Ps時活塞2內腔中的閥座與閥門1接觸，進油腔與出油腔
即為隔。此即比例閥的平衡狀態。
若進一步提高P1則活塞將回升，閥門再度開啟。油液繼續流入出油腔使P2也升高但由于A2＞A1，P2尚
高達 300 l/min氣量bar:在50%信號時的典型值為0.85 l/mi4 bar:在50%信號時的典型值為1.75
Thus A2> A1, it is above the hydraulic piston force is greater than
 the hydraulic force of the piston downward. In P1, P2 synchronous
少比需要的輸出壓力高0.7 ba工作溫度:40°C ~ +85°+2°C以下使用時,
NORGREN比例壓力閥6015461