【A621 電流探頭】美國泰克【A622 電流探頭】
A621
AC – 5 Hz to 50 kHz
100 mA to 2000 A Peak
For DMMs and Oscilloscopes
Clamp On
【A621 電流探頭】美國泰克【A622 電流探頭】金博宇科技專業代理的詳細資料：
深圳市金博宇科技有限公司是專業從事測試儀器儀表設備的代理經銷售后服務集成商，并與國內外儀表生產廠商有著廣泛的技術與銷售合作.作為美國菲利爾FLIR、美國FLUKE、美國泰克、美國Keithley 、美國安捷倫Agilent、中國臺灣皇晶ACUTE、英國PEM、普源精電、青島青智、費思泰克,華誼儀表，中國臺灣固緯，德國惠美, 法國CA，中國臺灣品致，長盛儀器，美爾諾，等諸多國內外代理與經銷：主要銷售的測試儀器儀表有: 示波器、信號源、萬用表、熱像儀、電流電壓探頭、電子負載、電源、頻譜、等測試儀器。。
A621
- AC – 5 Hz to 50 kHz
- 100 mA to 2000 A Peak
- For DMMs and Oscilloscopes
- Clamp On
A622
- AC/DC – 100 kHz
- 50 mA to 100 A Peak
- For DMMs and Oscilloscopes
Applications
- Motor Drives
- Inverters
- Power Supplies
- Avionics
A622
The A600 Series current probes high-value current probes are specifically designed to support measurements you make with your TekMeter®or oscilloscope*1.
A621 2000 Amp AC Current Probe/BNC
This industrial-style clamp-on probe has a BNC connector and may be used with a shrouded banana plug adapter*1so it can be used on digital multimeters, TekMeter, and scopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.
A622 100 Amp AC/DC Current Probe/BNC
This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and may be used with a shrouded banana plug adapter*1so it can also be used on digital multimeters, TekMeter, and scopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.
Recommended Products
TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes and DMM4020*1, DMM4040*1, and DMM4050*1digital multimeters.
*1For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead adapter is required.
