BSMJ0.45-12-3,BSMJ0.45-14-3,BSMJ0.45-15-3,BSMJ自愈式并聯電容器,BSMJ自愈式并聯電容器價格,生產廠家
一、概述 General description
       本公司生產的自愈式低電壓并聯電容器，采用目前的鋅鋁復合金屬化膜，引進*進的生產工藝、技術及日本、韓國的*設備，嚴格按國標GB/T12747-2004及標準IEC60831-1（1996）生產，主要用于低壓電網提高功率因數，減小無功損耗改善電壓質量。
　　Our self-healing type low voltage shunt capacitor,applied the advanced Zn-Al complexedmetallized film,adopted forein gadv anced production techology techniques and internationalIEC60831-1（1996）standards. The products is mainly suitable for low voltage electric networkto improve power factor,reduce reactive loss,and improve the voltage quality.
二、使用條件 Service condition
室內使用 Usein door
溫度類別 Temperaturerange:-25℃~50℃
溫度 humidity RH:＜85%
海拔高度 Altitude:＜2000m
安裝場所：無有害氣體和蒸氣，無導電性或爆炸性塵埃，無劇烈振動。
Mounting ambicnt:No harmless gas and steamed gas,no inductive and explosive dust,no violent vibration; 
通風散熱：設置兩個以上的電容器時，間距＞50mm以上。夏季溫度較高時應采取有效的散熱措施。
Ventilation/heat emission:When more than two capacitors are mounted,the mounting gap shallbe larger than 50mm.Further more,in summer,some effective measuresfor heat emission shall be taken.
三、型號及含義 Model implication

四、特點 Features

1、體積小、重量輕：由于使用金屬化聚薄膜新材料作為介質，體積、重量僅為老產品的1/4或1/5。
2、損耗低：實際損耗角正切值低于0.10%，所以電容自身能耗很低，發熱小，溫升低，工作壽命長，節能效果更佳。
3、優良的自愈性能：過電壓所造成介質局部擊穿能迅速自愈，恢復正常工作，使可靠性大為提高。
4、安全性：內裝自放電電阻和保險裝置。內裝自放電電阻能使電容器上所儲的電能自動泄放掉，當電容器發生故障時，保險裝置能及時斷開電源，避免故障的進一步發展，確保使用安全。
5、不漏油：本電容器采用*的半固體環保型浸漬劑，滴熔點高于70℃，在使用過程中不漏油，避免了環境污染，電容器也不會因漏油而失效。

1.Small volume,light weight:It is only 1/4 and 1/5 of the weight and volume of the outdatedproducts resdeotively.
2.Low loss:With the actual loss less than 0.1,little radiation,low temperature rise,and goodenergy conservation effect.
3.Excellent self-healing performance:When a part of the isolation is fed through due to the over voltage,it is capable of self-healing so as to continue the operation,therefore the reliabilityis improved greatly.
4.Safety:Equipped with self-discharging resistant and safety devices inside,the inner dischargingresistant can make the attached electric discharged;when thereis wrong with the capacitor,the fuse equipment can cut out the electric power,so that no more trouble with the capacitor,safetyand rcliable.
5.Without oil leakage:this product adoped advanced half-solid materials driips miltin-gpoint higher than 70℃,avoid leakge during operation and protect the envirament, the capacitorwillnot no use since the leakage.
五、技術參數 Technical parameter
額定電壓 Rated voltage:250VAC 400VAC 450VAC 525VAC 690VAC
額定容量：Ratcd capacifance:1~60kvar
容量允差 Capaacitance tolerance:-5~+10%
損耗角正切值 Tangent of the loss angle:≤0.15%
極間耐電壓 With stand voltage of case between phase:2.15Un.2s
極殼間耐壓 With stand voltage of case between phase:3KV（AC）10s&3.6KV（AC）2s
絕緣性：極殼間500VDCemong the phases lmin more than 1000MΩ
zui高過電壓：額定電壓的110% Max allowable voltage:Rated veltage 110%
zui高過電流：額定定電流的130% Max allowable current:Rated voltage 130%
自放電特性：斷開電源后3分鐘內，剩余電壓降到50V以下
Disconnect the power supply characteristics:self-discharge three minutes,remaining a voltage to 50V below
六、規格及尺寸 Model and Dimension