EPIN英國Peppers防爆格蘭，英國Peppers防爆變徑接頭，英國Peppers防爆堵頭，英國Peppers防爆呼吸閥，英國Peppers防爆密封接頭，英國Peppers防爆螺紋適配接頭，上海頤品自動化，技術(shù)：
英國Peppers防爆堵頭，防爆變徑，防爆呼吸閥Peppers cable Gland
上海頤品自動化，：
 |  | | | ACDPE Series Breather Drain provides a method of effectively draining any moisture within an enclosure whilst allowing the air inside the enclosure to breathe with the surrounding atmosphere. ACDPE series breather drains maintain Increased Safety Exe method of explosion protection and IP66 for IEC type applications. | | |
| CERTIFICATION | CENELEC
SIRA99ATEX3050U I M2 II 2DG EExe I/II; II 2DG E
Exe (Glass Filled Nylon and Aluminium)
CSA / A Ex
Class I, Zone 1, Exe II; Class I Division 2, Groups ABCD
GOST R-Exe II
POCC GB MΠ14.B00030
IECEx Ex e II
IECEx SIR 08.00244 |  | | APPLICATIONS | Internal Dust Seal provides ingress protection to IP66 and 4x, with the largest possible pore size to aid draining, whilst retaining filtration capabilities that remove debris from the moisture and retains it on the surface where it can easily be removed with compressed air. Additionally the structural strength and chemical resistance characteristics of the material enable the filter to meet the requirements of hazardous area installations
Caslated Locknut allows moisture to pass between the locknut and the enclosure, draining via holes in the thread without any build up of moisture in the bottom of the enclosure
Captive ‘O’ Ring Seal is located within a recess on the face of the breather drain again optimising ingress protection, ensuring the ‘o’ring is not displaced during installation and helping protect the ‘O’ ring from the environmental damage
External Drainage via two ports optimises ingress protection without compromising the draining capabilities | INGRESS
PROTECTION | IP66, CSA Enclosure Type 4x, NEMA 4x | | IMPACT RESISTANCE | 20Nm. (7Nm GF Nylon and Aluminium) | | OPERATING TEMPERATURES | -50ºC to +85ºC | | MATERIALS | Brass CZ121 (ACDPEB)
316 Stainless Steel (ACDPES)
Aluminium Alloy (ACDPEA)
30% Glass Filled Nylon (ACDPEN) |
| | VARIATIONS | Clearance hole (10): 10mm length of thread, supplied complete with a caslated locknut and having 2 holes in the thread wall positioned directly opposite each other
Threaded Entry: 15mm length of thread, either supplied with or without caslated locknut and having 3 holes in the thread wall, offset to provide a 9mm range to accommodate differing wall thickness’ | | THREADS | ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); PG | | SEALS | The standard ‘O’ Ring material is Nitrile | | PLATING | Zinc (ZP); Nickel (NP); Tin (TP); Electroless Nickel (EN) | | EXAMPLE PART NUMBER | Sample: ACDPEb/NP/M20/15
ACDPEb - Breather Drain type and material (Brass)
NP - Nickel plating
M20 - Male thread size
15 - Male thread length (15mm) and drain holes in thread (x 3 offset) |
|
| DIMENSIONS | | Size | Hex A/F | Hex A/C | Thread Length | Head Length |
|
| M20 - 1.2?h NPT | 28.6mm | 32.9mm | 10 (2 Hole) or 15 (3 Hole) | 15mm | | M25 - 3.4?hNPT | 34.9mm | 40.2mm | | |
|
| All Dimensions are in Millimetres |
NOTES:- 30% glass filled nylon variations are only available with 15mm length of thread version and are supplied with or without a brass caslated nut
- Installation instructions are supplied with the breather drain, the instructions must be read prior to installation and adhered to in full
- Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch
- Where metallic breather drains are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system
|
中國區(qū)分銷商：
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.
Website:www.epinautomation。。ｃｏｍ
:sales@epinautomation.com
*:
因?yàn)閷I(yè)，所以放心！
會員1.png)
儀表網(wǎng)